|
|
August 28th, 2008, 03:00
|
#61 |
|
I have a Broxa (MP5 Tactical) receiver is plastic body and clear (for canada custsoms) all the internals are TM compatible. from what I read it is 400 FPS out of the box (don't know that for sure will hopefully chroney it this weekend at a scrim...
apparently the problems that they had with the Lycoan were fixed with the Broxa Evolution.. (read this on a review) First Looks (not shot yet) Out of the box. Comes with wall charger, Broxa, Tac Grip, and full stock, cleaning rod, and plastic Flash hider and a green 2 point strap... and a 8.4v 7cell 1400 MAh battery with mini connector Weight Very nicely balanced in the hand without the battery is a bit front heavy with the battery in the stock is perfect. Receiver inside is full metal (clear plastic shell but all metal Guts) the battery is fairly large and the cavity for it in the stock fits well I tried a 8.4 3800MAh battery in there and it fits fine is a little long so I have to trim off the extra wire on the battery and put the end on then it will fit. Barrel is metal all the way. sight and outer barell is metal also Trigger and Auto/full/safe switch is metal has 3 rails on the front 1 bottom and one on each side all metal all can be removed. top rail is also metal and can be removed however you can only put the top rail in one spot as there is only grab point for each foot of the top rail (4 spots) it is quite a nice gun cant wait to game it and let everyone know how it performed. I just finished painting it with Ultra Flat Black Krylon called Krylon Camoflauge very nice indeed |
|
|
|
August 31st, 2008, 08:42
|
#62 | |
|
so i was googling "kirenex" and came accross an ended auction page from overstock.com. some lucky bastard picked up a brand new kirenex for 8 dollars and a quarter. yes $8.25 U.S.
and i thought my bro getting a lightly used one on ebay for 70 bucks was a good deal
__________________
 Quote:
|
|
|
|
|
|
October 17th, 2008, 11:48
|
#63 |
|
Does anyone know where I can find a a parts diagram for this rifle?
Cheers! |
|
|
|
|
|
October 17th, 2008, 11:53
|
#64 |
|
Official ASC "Dumb Ass"
|
|
|
|
|
|
December 9th, 2008, 19:27
|
#65 |
|
i own an aftermath broxa, the same as the lycaon, but with a full stock and more goodies. the gun is almost identicle to other "brand name" guns i've seen. and from what i've seen on here ( ASC) it seems you can do jhust about anything to them.
|
|
|
|
|
|
December 11th, 2008, 21:27
|
#66 |
|
I have the broxa evolution and it suks i dont know if it was just a bad model but i know the lycoan can use TM mags
|
|
|
|
|
|
December 23rd, 2008, 02:39
|
#67 |
|
broxa
does the broxa have metal gears? tm compatible mags?
|
|
|
|
|
|
December 23rd, 2008, 04:25
|
#68 |
|
As far as I've heard the Kraken and the Broxa are the only Aftermath products worth buying. I've heard both the Kraken and the Broxa will take tm compatible mags but that the Kraken is more compatible with TM compatible parts then the Broxa. I have a Kraken myself so I can speak from personal experence there that it will take the mags and most if not all of the tm parts, at least exteror parts. I haven't done anything inside the mechbox yet. I've never handled the Broxa so I only speak from second hand experence there.
Kuro_Neko |
|
|
|
|
December 23rd, 2008, 13:52
|
#69 |
|
Is the "X47" also a Kraken? I saw different boxes for both.
|
|
|
|
|
|
February 9th, 2009, 00:35
|
#70 |
|
Pretty sure that its a TM clone...i got one and seems to be a good buy, just had to fix up the stock and i slapped in a new tightbore. Accuracy's not too bad but i think the hop-up's gone to shit though
|
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
