|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 15th, 2009, 17:44
|
#1 |
|
mac11 (tf-11) Suppressor
Steel barrel twist 1-10 and Suppressor 9mm end
 http://yoopix.org/thumb/gallery?U0EaFh0fBht0BnoBbw--c2 Last edited by mousqueterre; February 15th, 2009 at 17:56.. |
|
|
|
|
February 15th, 2009, 18:19
|
#2 |
|
So where can one of these be acquired?
__________________
|
|
|
|
|
February 15th, 2009, 19:53
|
#3 |
|
It's good to finally see a mac11 without the two stage sound suppressor that every company thinks should be on it.
__________________
 Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
|
|
|
February 15th, 2009, 20:54
|
#4 | |
|
Quote:
|
|
|
|
|
|
February 15th, 2009, 21:15
|
#5 | |
|
Quote:
__________________
"Certainly there is no hunting like the hunting of man, and those who have hunted armed men long enough and like it, never really care for anything else thereafter." - Ernest Hemingway |
|
|
|
|
|
February 15th, 2009, 22:43
|
#6 |
|
Official ASC Bladesmith
|
Linky no worky!
Wonder how it'd compare to my custom designed and machined M11 suppressor, only hear a mild phut phut phut sound and mostly just bolt clacking noise, and also get an extra 60fps out of it on propane............ so it's close to 400fps at times. 
|
|
|
|
|
February 15th, 2009, 23:31
|
#7 | |
|
|
Quote:
__________________
Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
|
|
|
|
February 15th, 2009, 23:38
|
#8 |
|
pretty interrested too i work in a machine shop sooo....
__________________
 member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
|
|
|
February 16th, 2009, 03:09
|
#9 |
|
mac11
The gun available on canadian market on clear is tf-11. But is cheap plastic contruction im buy it for co2 blow back fun..... Im rebuil the barrel on steel because the alum supressor is too heavy for plastic mounth.... after im chamber the barrel at .232 whit 1-10 twist.... I like the final job and im get for my leg weapon
The supressor is for fake But can work for +-30 % but is other world Sorry for my english.... 1-10 = 1 rotation each 10 inch.... |
|
|
|
|
|
February 16th, 2009, 10:40
|
#10 |
|
Official ASC Bladesmith
|
Literally, internally I have a piece of 1/4ID brass tubing machined to fit inside the muzzle of the gun, last half of it has holes drilled in it to vent gas into the tube (not sure what it is, think it's an old phenolic case for a milling bit, I found it, has threads already in one end and was a good size), and the holes were separated by rubber disks held in place by rubber grommets. So the extra length of the barrel increases the fps, and the holes bleed off the gas and contain it. Perfect gun to attacth a suppressor to do to the nature of the way it works (open bolt).
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
