|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 15th, 2010, 23:19 | #1 |
a.k.a. Palucol
|
SD Hi-capa slide Fitment issue
Hello ASC!
I jsut got my SD 5.1 slide today, and Have a few fitment issues with it.... 1) the Rear sight doesnt seem to fit.... 2) the inner barrel is really tight in the outer barrel... so should i sand the inner barrel a bit? or the outer barrel? 3) the LUGS on the slide are straight , instead of beeing angled at 45 degrees) like it should be on a TM hicapa slide.... (should i dremel?) this causes the chamber to not "lock" in place.... so it doesnt fit properly.... please help me! thx! |
March 15th, 2010, 23:27 | #2 |
A-56 aka Mr.Hitman
|
What inner barrel do you have?
What outer barrel do you have? Looks like you got a hybrid slide, do you have a hybrid ported outer barrel? Don't dremel the slide, that's how the slide is supposed to be when you use the right parts for it. |
March 15th, 2010, 23:28 | #3 |
a.k.a. Palucol
|
SD slide, SD hybrid, SD chamber....stock inner barrel
so it shoudl fit like this? Last edited by Gunny_McSmith; March 15th, 2010 at 23:36.. |
March 15th, 2010, 23:41 | #4 |
Slow mo.
|
Yes that looks about right.
__________________
The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. |
March 15th, 2010, 23:49 | #5 |
A-56 aka Mr.Hitman
|
Looks right, only way you can make it really fit if you throw it back on the frame..
|
March 15th, 2010, 23:50 | #6 |
a.k.a. Palucol
|
That because hybrid barrel are different? Like they fit differently?
|
March 15th, 2010, 23:55 | #7 |
Slow mo.
|
They should fit the same and function exactly the same way where it matters.
__________________
The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. |
March 15th, 2010, 23:56 | #8 | |
A-56 aka Mr.Hitman
|
Quote:
Throw it back on the reciever and rack it back. About the inner barrel and outer barrel not fitting. Is there pieces of metal in the outer barrel? Is there crap on your inner barrel? Have you threw on some oil to push the inner barrel through the outer barrel? Have you installed the rear sight before you put in the blow back chamber? |
|
March 16th, 2010, 00:01 | #9 |
Slow mo.
|
Take a picture of the hopup + inner barrel and the chamber + outer barrel so we can see it.
__________________
The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. |
March 16th, 2010, 00:07 | #10 |
a.k.a. Palucol
|
Camera is dead..... Gotta recharge it..... Ill post pictures tmr.....
And gotta make that rear sight fit first......:S |
March 16th, 2010, 09:15 | #11 |
a.k.a. Palucol
|
UPDATE.....pics!
So manage to fit the rear sight.... And for the barrel, they has a inner screw for the front sight and it was blocking the inner barrel, so i sand it down a litte and it fits perfectly heres is a preview picture of the build, more(and better pictures) to come later in the pistol thread.... Here is how the barrel/chamber fits.... is that correct? Thanks PS: for the fake screws, and the sti logo for the grip, can i use crazy glue? Epoxy? Since its ABS plastic im not sure ....... Last edited by Gunny_McSmith; March 16th, 2010 at 09:20.. |
March 16th, 2010, 09:32 | #12 | |
* KNOWN LIAR *
|
That looks right,looks nice to
__________________
Quote:
|
|
March 16th, 2010, 09:33 | #13 | |
Captain Sunshine
|
Quote:
Looks good man, and yea, thats pretty much how it fits together. Super glue is fine for the logo and screws |
|
March 16th, 2010, 09:42 | #14 |
a.k.a. Palucol
|
Ok cool ...... but that because of the hybrid slide/barrel?
Thx BTW : @Daiviet : are you vietnamese? |
March 16th, 2010, 09:45 | #15 |
Captain Sunshine
|
|
|
Bookmarks |
|
|