C7A2

[RCAF]

So I have myself a G&G M16A3 but I want to make it an C7A2.

Now the main problem i am running into is how I can take my solid stock which houses my battery, and replace it with a collapsible stock.

so how do i go about doing this?
Where do I put the battery now once the stock is replaced?
What would be the most easygoing and cheapest way of doing it. Im not a gun tech.

Thanks for any info

[Trayne wr3ck]

do a search. The answers to all your questions lie in the depths of this wonderful place.

http://www.airsoftcanada.com/showthread.php?t=84825

[scurvythepirate]

Originally Posted by RCAF

So I have myself a G&G M16A3 but I want to make it an C7A2.

Now the main problem i am running into is how I can take my solid stock which houses my battery, and replace it with a collapsible stock.

so how do i go about doing this?
Where do I put the battery now once the stock is replaced?
What would be the most easygoing and cheapest way of doing it. Im not a gun tech.

Thanks for any info

1. Buy a buffer tube set & Stock.
2. Buffer Tube.

Use these combinations:
http://shop.ehobbyasia.com/king-arms...tock-pipe.html
http://shop.ehobbyasia.com/king-arms...tock-pipe.html

3. Pretty easy install. Tons of guides online (you dont have to open "up" your gun".

PS. Make sure you know that risks involved when using lithium batteries.

[RCAF]

What are those risks?

[scurvythepirate]

Originally Posted by RCAF

What are those risks?

http://tinyurl.com/3567892

EDIT: OR http://bit.ly/Mzb78

[Rock 'N' Roll Outlaw]

Another option is to use a Crane stock or other collapsible stock that hows a battery in a similar way. Theres always the mock PEQII units that also house batteries, or by using a battery bag attached to the standard LE style collapsible stock.

[RCAF]

I got a collapsible stock but the issue is that wire runs under the tube and wont fit inside it. so I got this wire on the outside now and it looks lame

[Kokanee]

You want a lipo battery that fits inside the buffer tube.

[RCAF]

Yeah the lipo would work but the issue is that the connection for the lipo is below the tube