P90 pistons And inner barrels?

[Short Round]

I've got a Gearbox V6 for a P90 that needs a new Piston? ANY Suggestions?

Also I have been having the problem of bbs hitting the top of my custom silencer foam (shaped for a H&K Pro silencer) and wanted to know other then the Standard MadBull 6.03mm Black Python V2, P90/G36C Barrel, 247mm which I have, if there are any other inner barrels like the one CA one they put with their Proline P90 model for use of the silencer?

[Dart]

save your money and just buy a stock TM one. Alot of gun docs swear by them and the piston is a part that gets used up...

and I would much rather my piston be the soft part and replace that than my gears need replacing.

[Short Round]

Looking into them!

Any suggestions on the inner barrel?

[cjboi]

I got the systema piston and piston head on mine.... my piston head is aluminum though (ported) its pretty good

[Kos-Mos]

Modify high speed white piston is the only one that I found better than the stock Marui one.

As for the barrel, the BBs hitting the inside of your silencer is either because you have WAY too much hop-up, the silencer is not straight or there is a bend in your barrel. I am using a Gemtech G5 silencer on my rifle and even if the inner barrel is about 3" before the silencer, it does not hit.

[Dart]

just remembered on the gfs p90 when we but a m4 length barrel in there we needed to use a spacer. Its prob wobling around like mad. The p90 barrel doesn't exactly have alot holding it still.

[Short Round]

Originally Posted by Dart

just remembered on the gfs p90 when we but a m4 length barrel in there we needed to use a spacer. Its prob wobling around like mad. The p90 barrel doesn't exactly have alot holding it still.

Agh alright, good to know. I had to replace the foam inside my Silencer with a custom foam made from pipping foam. I guess I could in theory use a longer Length barrel and squeeze the barrel into the silencer.

[Adamlxlx]

I have a 430mm barrel that came with my CA. Buy it off me

[Dart]

we used a proper metal spacer. How ever nothing stopping you from using black tape

[Short Round]

Originally Posted by Dart

we used a proper metal spacer. How ever nothing stopping you from using black tape

True. The first time I made a custon foam inner for my silencer it was so tightly compacted it was almost a work out taking the damn thing out (hole was no longer then say a .25g Armist BB)

I wouldn't know where to find metal spacers that would fit my silencer though, plus doesn't that weight down your gun more on the front?

[Dart]

eh wasn't noticeable.

[Short Round]

Should I remove the second tooth off the Piston (Modify Polycarbonate Full Teeth) I got?

[Azathoth]

remove as necessary to improve AOE as required.

[Short Round]

Update on my Piston problem can be found here: http://www.airsoftcanada.com/showthr...33#post1292933

Still looking for help with this problem.