CA / G&G M14 mechbox upgrades

[CanadianBeast]

So I've done a bit of research, and I know all but a couple things I need to order, so I'm asking if anyone has had any experience with this mechbox.

What I've concluded from my research is the CA mechbox is basically a G&G clone, as such they have an irregular or proprietary cylinder head. The airseal nozzle is apparently an AUGs.

The list of compatible mechbox parts are:

V2/V3 Gears
V3 Spring Guide
AUG Airnozzle
Short Motors
V2/V3 Standard Cylinder
V2/V3 Standard Piston
V2/V3 Standard Piston Head
G&G M14 Proprietary Cylinder Head
G&G M14 Proprietary Tappet Plate (might be a V6 with some sanding)

My question obviously is upgrading the cylinder head, I have found a G&G upgrade cylinder head. From what I can tell its just a cylinder head with an offset air nozzle

Anyone have any experience with upgrading one of these?

[George Burdell]

I am pretty sure they are both clones of TM, and anything for TM should fit them.

[CanadianBeast]

No, CA and G&G are not TM clones.

[CanadianBeast]

http://www.black-wolf.ru/review/weap.../en_gg_m14.bwc

Very awesome site for anyone that comes across this thread and owns/wants to own one of these rifles.

[LongStone]

its a great review but only deals with Gen 1, afaik Gen 2&3 had significant improvements but I haven't seen a clear comparison.
I'm looking at upgrading the one I just bought, let you know when I find any worth while info

[Adamlxlx]

Originally Posted by George Burdell

I am pretty sure they are both clones of TM, and anything for TM should fit them.

No, G&G IS NOT a TM clone. Won't even accept TM mags.

[lurkingknight]

hopup is an AUG unit.

I bought the g&g max version of the gun. I believe it has that upgrade cylinder head already installed. It also has something that piston and similar piston head, the head I think looks a bit different, but it is similar in style. I can't tell you for sure, I didn't look that closely at it when I opened it up. I did recently put in a standard CA poly carb piston with all metal teeth. I removed the first regular sized tooth like the factory piston and put in an m120 spring. The stock m100 and the original upgrade m150(I'm told) are about 1 cm longer when uncompressed.

Reassembled, mine is shooting just a hair over 400, which will settle under once the spring is broken in.

You do want to put a mosfet in asap, after about 8k-10k rounds my trigger block and contacts are starting to show the wear. The piston was starting to show some signs of wear along the teeth, so I replaced the piston as a precaution.