Sig 552 Front Receiver(Handguard) Pin

icycold123 · September 14th, 2011, 21:29

Hello, fellow members of ASC.

I have lost the front handguard pin on my JG Sig 552 and have been looking for a replacement with no luck.

I tried looking for a TM Sig 552 handguard pin, but everywhere I checked didn't have it or it was sold out.

All I have found were some ICS handguad pins from Evike.com.

I was just wondering will this work with a JG Sig 552, and if not, are there any alternatives to replacing it(such as using the pin from another gun)?

Also, G&G makes a Sig 552, will the body pin on those work with a JG?

If anyone has any links, can you please post them.

TaroBear · September 14th, 2011, 21:49

I don't know the answer to your question, but I don't recommend an ICS pin. It's completely different from the GG one. As far as I know, each company has a little something different about their SIGs. I believe the JG is a clone of the Marui, though.

Inb4sigsignal

Styrak · September 14th, 2011, 22:39

Link to the pin? It would be easy to compare TM/JG to ICS.
A G&G one will not work (at least not as intended, they're the same as real steel ones).

TaroBear · September 15th, 2011, 14:35

http://www.dentrinityshop.com/photo/OTA_S/tnsig002.jpg

Comparing this image to my ICS pin, it appears that the position of the two nubs that prevent it from moving are in a different place between the Marui and the ICS. The ICS nubs are right at the bottom, whereas Marui's pins look like they're only 3/4 of the way down the pin.

icycold123 · September 15th, 2011, 20:37

Tarobear has linked what the pin looks like, and yes I know that a TM one will work. It's just that it has been difficult to find one(everywhere I checked was sold out), and just wanted to see if there were any that would fit.

TaroBear · September 16th, 2011, 03:34

If that reference photo is correct, I don't see how the ICS pin would work in the JG.

talon · September 16th, 2011, 07:03

zipties have been holding the front ends of my mp5s for years now.

ronin49v · November 27th, 2011, 03:03

You can find it on Ehobby
http://shop.ehobbyasia.com/well-rece...ig552-aeg.html
it fits my JG sig 552

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 14th, 2011, 21:29	#1
icycold123 Trader rating Join Date: Nov 2010 Location: Scarborough, Ontario, Canada	Sig 552 Front Receiver(Handguard) Pin Hello, fellow members of ASC. I have lost the front handguard pin on my JG Sig 552 and have been looking for a replacement with no luck. I tried looking for a TM Sig 552 handguard pin, but everywhere I checked didn't have it or it was sold out. All I have found were some ICS handguad pins from Evike.com. I was just wondering will this work with a JG Sig 552, and if not, are there any alternatives to replacing it(such as using the pin from another gun)? Also, G&G makes a Sig 552, will the body pin on those work with a JG? If anyone has any links, can you please post them.

September 14th, 2011, 21:49	#2
TaroBear Trader rating Join Date: Dec 2009 Location: Markham/Toronto	I don't know the answer to your question, but I don't recommend an ICS pin. It's completely different from the GG one. As far as I know, each company has a little something different about their SIGs. I believe the JG is a clone of the Marui, though. Inb4sigsignal __________________ This message was brought to you by Umbrella Inc.

September 14th, 2011, 22:39	#3
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Link to the pin? It would be easy to compare TM/JG to ICS. A G&G one will not work (at least not as intended, they're the same as real steel ones). __________________ Airsoft Sales and Repair/Upgrade Services

September 15th, 2011, 14:35	#4
TaroBear Trader rating Join Date: Dec 2009 Location: Markham/Toronto	http://www.dentrinityshop.com/photo/OTA_S/tnsig002.jpg Comparing this image to my ICS pin, it appears that the position of the two nubs that prevent it from moving are in a different place between the Marui and the ICS. The ICS nubs are right at the bottom, whereas Marui's pins look like they're only 3/4 of the way down the pin. __________________ This message was brought to you by Umbrella Inc.

September 15th, 2011, 20:37	#5
icycold123 Trader rating Join Date: Nov 2010 Location: Scarborough, Ontario, Canada	Tarobear has linked what the pin looks like, and yes I know that a TM one will work. It's just that it has been difficult to find one(everywhere I checked was sold out), and just wanted to see if there were any that would fit.

September 16th, 2011, 03:34	#6
TaroBear Trader rating Join Date: Dec 2009 Location: Markham/Toronto	If that reference photo is correct, I don't see how the ICS pin would work in the JG. __________________ This message was brought to you by Umbrella Inc.

September 16th, 2011, 07:03	#7
talon Trader rating Join Date: Feb 2006 Location: Ghosts HQ	zipties have been holding the front ends of my mp5s for years now. __________________ http://img.photobucket.com/albums/v2...lon/ghosts.gif ACUFART Forever!!! Team GHOSTS - Fides et Amicitia

November 27th, 2011, 03:03	#8
ronin49v Trader rating Join Date: Feb 2009 Location: Vancouver	You can find it on Ehobby http://shop.ehobbyasia.com/well-rece...ig552-aeg.html it fits my JG sig 552

Sig 552 Front Receiver(Handguard) Pin

Doctor's Corner