VFC M4 issue

Specs · November 30th, 2011, 23:51

Hello,

I am changing the spring on an M4 and I can not get the stock pipe off....the screw is impossible. Any suggestions?

PrIeSt · November 30th, 2011, 23:56

Ugh type?

There's usually a screw inside. You need a long Philips to stick down the tube from the end.

Specs · November 30th, 2011, 23:58

Edit....im amazing, kinda like red green, anyway I foud a way to get it out thanks for the reply!

SuperHog · December 1st, 2011, 00:16

Quote:

Originally Posted by Specs

Hello,

I am changing the spring on an M4 and I can not get the stock pipe off....the screw is impossible. Any suggestions?

The buffer tube nut is probably locked down tight making the phillips screw hard to back out. Loosen the buffer tube nut first.

The power wires also have tiny bullet connectors that need to be separated before you pull the mech box out of the receiver.

Specs · December 1st, 2011, 00:58

Ya that helped! I have it down to the gearbox now, should be a breeze. The ambi mag catch is a stupid gimic and it was 30 mins of tinkering with it to get it to come out

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 30th, 2011, 23:51	#1
Specs Trader rating Join Date: Dec 2007 Location: Victoria City	VFC M4 issue Hello, I am changing the spring on an M4 and I can not get the stock pipe off....the screw is impossible. Any suggestions? __________________ Kingston airsoft, we do it better. Last edited by Specs; November 30th, 2011 at 23:58..

November 30th, 2011, 23:56	#2
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	Ugh type? There's usually a screw inside. You need a long Philips to stick down the tube from the end. __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

November 30th, 2011, 23:58	#3
Specs Trader rating Join Date: Dec 2007 Location: Victoria City	Edit....im amazing, kinda like red green, anyway I foud a way to get it out thanks for the reply! __________________ Kingston airsoft, we do it better.

December 1st, 2011, 00:58	#5
Specs Trader rating Join Date: Dec 2007 Location: Victoria City	Ya that helped! I have it down to the gearbox now, should be a breeze. The ambi mag catch is a stupid gimic and it was 30 mins of tinkering with it to get it to come out __________________ Kingston airsoft, we do it better.

VFC M4 issue

Upgrades & Modifications