Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > General > General
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Beware of manchovie!!!

:

General

Closed Thread
 
Thread Tools
Old January 4th, 2012, 00:01   #1
Bdot
Banned
 
Join Date: Feb 2010
Location: Newmarket Ontario
Angry Beware of manchovie!!!

Hey guys first off i wish you all a happy holidays and new year!!

Im making this thread to tell you guys my very disappointing and truly unacceptable experience i had with one of the gun docs i found on this site. I dont know if this is the right section to be posting this in, but i believe it does need its own thread and that everyone should know what i had to go through so it doesnt happen to anyone else.

My brother and i both had a gun that needed to be worked on, mine being a tokyo marui mp5 and my brothers is a custom built troy m7a1. We were wanting a few very basic parts to increase the velocity and accuracy in each gun. Since we dont know how to put any of these parts in we decided to find a gun doc to help us out.

After messaging a bunch of guys who lived in our area, we got a response from someone named MANCHOVIE a few days later saying he'd be happily willing to work on them. We checked out his page again and realize he was the most well known gun doc we messaged and see that hes worked on over 100 guns and has over 60 positive feedbacks. We message him back, he gives us his number and we end up setting a date to drop off our guns. It was October 21st when we drove down to his house, showed him the guns and told him what we would like to be done. He said there would be no problem and after he opens them up he would give us his opinion on what he thinks would be best for them. He seemed like a nice and helpful guy and that he knew a lot about airsoft, which he should. We left them with him and went our way.

A couple days pass without hearing from him, which is understandable, we decide to text him and see whats going on. He said he was out of town and would get a chance to look at them sometime this week. Two weeks and a bit goes by without hearing from him other than a response to getting a silencer, so we text him again. The next day he tells us he sent us a report over asc although our inbox in empty. He “resends” it and it says the mp5 needs a new tappet plate which broke and is jamming the gears, and the m7 is shooting great and recommends getting a new spring and a grease/reshim. Other than those parts he tells us to give him a list of anything else we wanted off of airsoftparts.ca and he can get it fast. We send him a list of parts the same day.

Days go by without hearing from him so again we have to text him. He tells us he plans to do more tests to make sure he gets everything we need and he should order it by tonight. Another week goes by without a reply to any of our texts and not knowing if he ordered it yet. We continue to text him everyday until we finally get a message on asc a few days later saying that hes having troubles with disassembling and reassembling the m7 because of the custom wiring job and that he needs to resolder them every time he takes it apart. Why are we just hearing this now when supposedly hes already taken them apart?? Ok we realize its a little extra work but nothing to worry about, especially that fact that really it only needs to be done no more than a couple times. He also says he didnt order the parts yet because he wanted to know if we wanted to rewire everything to a pouch on the stock. Uh no thanks we paid 80 bucks for the king arms peq box, plus 2 custom king arms 9.6v batteries and thats just going to cost us more money. After telling him this and few more days of waiting he finally texts us with the price of the parts and everything matches up. We ordered very basic parts including springs and barrels for each, a new hop-up for the m7 and a 3-lug silencer for the mp5.

A week later, on December 2nd he picks up the parts and tells us they will be all ready soon. I ask for him to try and get them finished for my brothers birthday on the 6th, but no reply. I then tell him the absolute latest we can pick them up by is the 16th because we leave on our Christmas trip for 9 days. Over a week goes by with no replies until the 12th when he tells us hes going to have an update this night. Next day he tells us hes having issues with the hop-up not making a seal but he did some research and said he should be able to make it work. I remind him they need to be done by friday, and he tells us not to worry.

Two days later he tells us the silencer isnt going to work on the mp5 and he hasnt worked on any internals because supposedly it takes “forever” to disassemble these guns. Im not a gun doc but even i know it doesnt nearly take as long as he says. He also now says the m7 is working very well disassembled shooting at 360fps, not sure how thats possible. I then ask him how long the new barrel is going to stick out of the mp5 since i dont want the silencer cus it doesnt work. He starts to go off saying i need to give him a great reason why i shouldnt have to pay for the 90$ silencer both he and the website said should work. I specifically asked him if it would work and he said of course, whole reason why we got a gun doc. Why would i buy a part that wont work, and if for some reason i did i would return it, which is impossible in this case since he used his credit card. I make sure to let him know they need to be done and again he tells me its a pain and takes forever to assemble the guns. How many times is this guy taking these things apart???

Well this is now the day before were supposed to pick them up and after several texts with a reply at midnight when he calls me saying theres no way hes getting them done for tomroro and that he has to go to Montreal all of a sudden for a funeral. Obviously im pissed off finding this out the morning of, but since hes going to a funeral i back off as much as i can and tell him were going to delay our trip until tuesday and pick them up then cus theres no way were leaving without them. Everythings fine and he says hes going to call us when he gets back on sunday.

Monday rolls around and we dont hear from him until 11 that night after several texts and no replies. He goes and tells us the mp5 is working nice but theres a crack in the hop-up but it should be fine!! Again why the fuck am i hearing this now, well probably cus he broke it last min while he was messing around. Its also shooting a little low so he has to swap the springs. Thought he already did that?? We ask him if hes going to get everything done because again this is the morning of. He texts me “We’ll see. Wish me luck.” Now im getting really pissed off since i told this guy numerous times we need to come tomroro cus we cant delay our trip again. Now this is where everything gets really fucked up.

An hour later he texts me saying “the mp5 is done and now onto the m7.” How is that possible if he told us it takes him forever to assemble these guns? So in an hour he ‘‘supposedly’’ disassembled it, swapped the springs and reassembled it. Well we know now hes been lieing about something. I text him back calling him out on this lie and he replies to me saying “Relax, i have no idea what your freaking out about.” I text him back saying im not freaking out i just wana know there gonna be done this time. Im already really pissed and it gets even worse when he tells me “how the hell am i supposed to know if theyl get done? all i can do is hope for the best and you being on my dick isnt helping.” No more than 10 minutes later “M7 is finished both guns shooting primo.”

At first i dont even know what to think cus now “supposedly” he disassembled and reassembled BOTH guns while swapping the barrels in each so that the shorter one was now in the mp5 all in under 2 hours. We know it clearly means he lieing about the time it takes him, which we thought in the first place, or hes lieing about actually working on them that night. I text him this calling him out once again and he has the nerve to tell me “its late because i have a fucking life and this is the only time i have to work on them, I should be asleep and u should be grateful.” I dont bother to say anything cus words arent exactly what i wanted to give him.

The next day we go to his house and he shows us the guns and test fires them dry without any bbs. They seem to work fine so we give him all the money he asked for. The only thing he says of value is i should be paying for the silencer. Nothing about delaying our trip or taking forever to do this. We go out to the car and my brother realizes theres a rattling noise in the handle every time he shoots. We go back to him and ask him what it is. Again he gives us a pathetic answer “how the fuck am i supposed to know whats rattling in your gun it works fine doesnt it?” Well u just had our guns for the past 2 months how the fuck dont you know! We get home put some bbs in it and guess what, they just fall right out maybe 5 feet infront. Call this fucker back and he says “its probably a broken gear or something i dunno.” I start freaking out he hangs up. Try a few more shots than all of a sudden doesnt even make a noise when you pull the trigger. Well i guess that rattling noise was the broken gear he never told us about. I call him back until he finally decides to pick up after multiple tries. He goes on saying “they worked fine at my house, you guys were the ones who broke something” and a bunch of other bullshit i didnt even bother to listen to. I finally get him to be somewhat reasonable and tells me he will call me after hes done work.

He texts me later saying hes going to reimburse us with half of the service fee, which is 70$. We already thought 140$ for his shitty service was way to much to begin with but we agree on it cus i didnt even wanna deal with the guy anymore. We end up bringing the m7 to Toronto Airsoft to get repaired before we leave, by the way big props to them! When we get back he tells us the gear was broken, obviously, the inside was bone dry, and its shooting at 320fps... So really all that manchovie did for a hefty 70$ to the m7 was install the 3 parts(barrel, hop-up, spring) in 2 MONTHS and let it break in his hands without telling us. Who knows if he even put the new spring in cus he never gave us our old parts back saying theyr “garbage and useless” and he told us he chronied it at 360fps(lie). I text this joke all this and the last thing he says to me “thanks for implying im a scammer. your guns are probably working PERFECTLY just like when i had and chronied them. I should have checked if the m7 was even broken before trusting your dipshit asses. Enjoy the cash and the fruits of your bullshit.” All while we we’re at Toronto Airsoft getting our gun back...

Well he thinks it ended there, but i hope this thread keeps everyone away from this lazy scamming asshole. Everyone stay away from MANCHOVIE cus nobody deserves this pathetic display of poor business and disrespect!!!!!!!!!!!!!!!!

Ill be waiting here patiently for more of your fruity bullshit excuses BARTEK, LMAO!!!! Hope u never get a customer again.
Bdot is offline  
Old January 4th, 2012, 00:36   #2
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Japan
First off, I have no relation to Manchovie. I've never talked to him before further than replying to one of his posts on the forums.

It honestly sounds like you're one of those "nightmare" customers. Gundoctors are few and far between. Some of them have ALOT of work to do, and as far as I know there isn't anyone in the country who has a 100% full time job as an airsoft gun doctor.

When someone is doing something for you, don't text them and keep calling them for updates... I know when people do that to me it drives me nuts.

You should always try the gun at the tech's place with BB's... I have a huge bag of BB's available, and 90% of the people that pick stuff up at my place shoot their upgraded gun and have the option to run it through the chrono if they want to.

I can't comment on the gun not working as I have never (to my knowledge) seen or heard anything about his work. It sounds like something that could have been sorted out much smoother if both parties had remained polite and civil.
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline  
Old January 4th, 2012, 00:43   #3
Solomance
 
Solomance's Avatar
 
Join Date: Nov 2006
Location: Victoria, BC
Manchovie is a friend and former co-worker of mine. I would trust any of my guns to him in a heartbeat and have. Any failure here is on the part of the abusive and unreasonable customer.

Also if your ever in Toronto don't take the time to check out TTAC3. You will be refused at the door.
__________________
-Patrick
TTAC3 Instructor
Team GHOSTS- Fides et Amicitia

Quote:
Originally Posted by amano999 View Post
Forget Cadpat and Armalites are boring.....

Last edited by Solomance; January 4th, 2012 at 00:46.. Reason: TTAC3 ban.
Solomance is offline  
Old January 4th, 2012, 00:46   #4
Derpystronk
 
Derpystronk's Avatar
 
Join Date: Oct 2010
Location: Southern Ontario
Bdot, no offence... But if you can't wait for someone to fix your toys you should really learn to do it yourself.
__________________
Airsoft Community & Events
http://www.OP4S.com
Derpystronk is offline  
Old January 4th, 2012, 00:47   #5
ShelledPants
 
ShelledPants's Avatar
 
Join Date: Feb 2008
Location: Toronto, On
Oh man, where's my popcorn?

[I've spoken to manchovie several times at conventions, and I am good friends with many veterans who will back him up, I've also shot with him a number of times, and he also has a wicked reputation as a gun doctor. Amos, I believe, has hit the nail on the head and I will happily distance myself from Bdot as a participant of our sport, and I will distance you from any games I co-host, admin for, or even know the host. Welcome to the boards.]
__________________


Ár skal r?*sa, sá er annars vill
fé eða fjör hafa. Sjaldan liggjandi úlfur
lær um getur né sofandi maður sigur.
ShelledPants is offline  
Old January 4th, 2012, 00:50   #6
jordan7831
will always be Mike Litoris in our hearts
 
jordan7831's Avatar
 
Join Date: Jul 2004
Location: North York - Toronto
That really sucks to hear. This is why I do all my work myself.
jordan7831 is offline  
Old January 4th, 2012, 00:57   #7
Shirley
A-56 aka Mr.Hitman
 
Shirley's Avatar
 
Join Date: Nov 2007
Location: Toronto, ON
Who are you to start swearing and calling someone names?
Why aren't you verified?
What's up with your attitude?
__________________

CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS)
CAPS DIRECTOR # 0047
Shirley is offline  
Old January 4th, 2012, 01:02   #8
Coresair
 
Coresair's Avatar
 
Join Date: Jan 2010
Location: Notre-Dame-de-Guns, MTL.
__________________
Quote:
Originally Posted by Mitchell12 View Post
I don't need an excuse, I like doing it. Why do you like sex? Because it gives you babies? Doubtful.
Coresair is offline  
Old January 4th, 2012, 01:05   #9
TaroBear
 
TaroBear's Avatar
 
Join Date: Dec 2009
Location: Markham/Toronto
I understand you may be frustrated at your gun's problems, but you're way out of line in the way you dealt with your gun doc. You think you're the only one who's requested his services? You think just because you've flashed your cash, he'll drop everything else in his life to rescue your AEG? No, and you knew that to begin with. It sounds like you were hounding the guy. In addition, have you ever taken apart a gun? Most people have, and don't kid yourself, it's no easy task. It doesn't matter if you've done it a hundred times. It's a messy business. There's grease everywhere, overly-cocked springs that fly out at you, a million little bits that'll test the best modeler's patience, and so on. If an experienced gun doc says your gun is a pain in the ass to take apart, and you disagree, why aren't you doing it yourself? Do you go to a doctor and tell him his diagnosis of your disease is wrong? So that's you.

As to whether or not the gun was fixed, and when any additional problems may have occurred, have you consulted any other experienced parties? ASC has many avenues of dispute you could have pursued before dragging someone's name through the mud. I'll admit, you're not going to get fair treatment here; you're calling out a veteran who's damn well respected. But you should have expected as much, from your confrontational attitude towards the situation. You'd better have all your ducks in line (which you probably don't) if you want to continue this line of discussion. Do the smart thing and settle it like a civilized person, before the admins come in here and force the same thing on you. And they're nowhere near as nice as any of the previous posters have been.
__________________
This message was brought to you by Umbrella Inc.
TaroBear is offline  
Old January 4th, 2012, 01:06   #10
Eeyore
Suburban Gun Runner
 
Join Date: Jan 2009
Location: St Lambert, Quebec
Quote:
Originally Posted by Mr.Hitman View Post
Who are you to start swearing and calling someone names?
Why aren't you verified?
What's up with your attitude?
+1

I have to admit bud, that if you had calmly stated your experience and not vilified or insulted Manchovie you would probably received more sympathy. Manchovie is a trusted member of the community, while you are not yet even age verified meaning that you are either underage or unwilling to take even the most basic steps to be part of this community.

Thanks not to say that you are not correct in your interpretation of the events just that reputation on ASC is all you have and Manchovie has a great one while you have none. I suggest that in the future before you go off on a rant on another member in good standing with this community you think long and hard on how to go about getting your point across.

If I were you I would try to work out an agreement with Manchovie, but as you basically came out flinging shit and him and trying to ruin his good name he will probably tell you to go eat a dick.
__________________
Quote:
Originally Posted by Pinard View Post
eeyore, the more I look at your avatar, the more I find it looks like a vagina...
http://i.imgur.com/wBfBB.gif
Eeyore is offline  
Old January 4th, 2012, 01:06   #11
Bdot
Banned
 
Join Date: Feb 2010
Location: Newmarket Ontario
alright awesome the first replies obviously have to be from his freinds to back him up. Im not new to this site or airsoft actually, i just dont live for airsoft like u all do, its a hobby and when i put alot of money into it i expect good results. When i message someone to put in a few basic parts in a reasonable period of time, thats what i expect. Why should i trust someone i dont know with over a thousand dollars worth of product when i get no replies and a bunch of lies and excuses. There wouldnt have been any constant messaging if he did what he said he was going to do.
You guys probably quit after the first paragraph. He didnt do anything he said he would and gave us A BROKEN GUN after 2 months then denied it being broken. Oh and this guy defenitly didnt have ALOT of work to do AMOS cus he said it himself he spent all of his "free time" on our guns. He told me it took him 8 hours to do everything. Thats like half an hour a day, and i had to pay him 140 fucking dollars for it.
Why dont you read the post first before u all act like know-it-all cunts who back up their boyfriend.
Bdot is offline  
Old January 4th, 2012, 01:07   #12
AngelusNex
formerly Sepulcrum
 
AngelusNex's Avatar
 
Join Date: May 2007
Location: Kingston,ON, aka Funkasia
Send a message via MSN to AngelusNex
Dude, are you paying him $100 a day? if not let him take his time. Sometimes I get bogged down and it takes a little longer than expected to get a customers gun back to them. I have a life, a family and I know that I don't want to spend all my sometimes limited spare time working on guns.
AngelusNex is offline  
Old January 4th, 2012, 01:09   #13
ShelledPants
 
ShelledPants's Avatar
 
Join Date: Feb 2008
Location: Toronto, On
Quote:
Originally Posted by Bdot View Post
alright awesome the first replies obviously have to be from his freinds to back him up. Im not new to this site or airsoft actually, i just dont live for airsoft like u all do, its a hobby and when i put alot of money into it i expect good results. When i message someone to put in a few basic parts in a reasonable period of time, thats what i expect. Why should i trust someone i dont know with over a thousand dollars worth of product when i get no replies and a bunch of lies and excuses. There wouldnt have been any constant messaging if he did what he said he was going to do.
You guys probably quit after the first paragraph. He didnt do anything he said he would and gave us A BROKEN GUN after 2 months then denied it being broken. Oh and this guy defenitly didnt have ALOT of work to do AMOS cus he said it himself he spent all of his "free time" on our guns. He told me it took him 8 hours to do everything. Thats like half an hour a day, and i had to pay him 140 fucking dollars for it.
Why dont you read the post first before u all act like know-it-all cunts who back up their boyfriend.
Aw, you mad.
__________________


Ár skal r?*sa, sá er annars vill
fé eða fjör hafa. Sjaldan liggjandi úlfur
lær um getur né sofandi maður sigur.
ShelledPants is offline  
Old January 4th, 2012, 01:11   #14
White_knight
 
White_knight's Avatar
 
Join Date: Jul 2006
id love to here his side of the story. no offence but you seem like you needed to cool it a little bit. from your story he seemed very civil until you broke down. these guns can be VERY temperamental and im sorry but hounding someone at all hours is ridiculous.
__________________
Burnaby / Vancouver area Age verifier

White_knight is offline  
Old January 4th, 2012, 01:11   #15
SINN
 
SINN's Avatar
 
Join Date: Jun 2005
Location: Toronto
Send a message via MSN to SINN
Quote:
Why dont you read the post first before u all act like know-it-all cunts who back up their boyfriend.
yeah....that will work for you asshole..
__________________
MODT - Magnus Operator Development Team - tu fui ego eris
SINN is offline  
Closed ThreadTop


Go Back   Airsoft Canada > General > General

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 14:20.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.