WEHK416 Magpul MOE grip

[landwarrior]

Hello

I was just wondering if anyone know how to install a Magpul MOE grip onto a WE HK416. Are there any modifications needed?? Step wise procedures will be much appreciated

Thanks =)

[R1ghty]

I installed one onto my WE M4, all that is required is drilling a small hole.

On the right side of the grip, there is a spring that pushes a pin up into the fire selector. you must drill a hole down into your grip(the MOE).

Be careful how deep you go.
I kept checking, and it wasn't deep enough. The next thing I know, It's too deep, and I had to shim the spring higher.


Imageshack made me register my email... so I removed the link... F***ers

[landwarrior]

Oh great. Thanks for your help =)

[bobotea]

is the drilling also required on the RS grip or just the replica MOE grip?

[jareyes]

Originally Posted by bobotea

is the drilling also required on the RS grip or just the replica MOE grip?

The RS grip has the hole drilled already; it's just the replica that needs it.

[landwarrior]

Originally Posted by jareyes

The RS grip has the hole drilled already; it's just the replica that needs it.

is the hole for the real magpul grip in the same place as the original grip?

[bobotea]

Originally Posted by landwarrior

is the hole for the real magpul grip in the same place as the original grip?

yes i believe so.

[Brian McIlmoyle]

Originally Posted by landwarrior

is the hole for the real magpul grip in the same place as the original grip?

The hole is to retain the selector switch detent rod and spring.. the Magpul grip is a drop in replacement for the original grip.. hole in the same place

[landwarrior]

Thank you all for such wonderful knowledge!! =)

[landwarrior]

oh sorry, one more question. Is the grip screw (part #80) a hex screw or a screw like this one?
http://www.airsoftoutletnw.com/index...mart&Itemid=28

I dont have access to my 416 at the moment so I cant check. =)