External/Internal Modification on LCT Ak 74 MN NV

[Oshiha]

I would like to start off this thread by telling you peeps that I am not every experienced in modifications whatsoever, therefore I would like some help from all of y'all! This is the gun that I have right now ...

http://sharomet.ru/images/products/l...5ada03ecb5ee0b

First off, for external modification, I would like to change the stock into a MAGPUL PTS MOE Stock (Black), but this requires me to have a buffer tube...now this is the problem im running into... don't know which one! I'm on a budget as well and so far I've seen this and I'm not exactly sure if this set up will work!
http://www.srvv.org/en/catalog/30626...phrase_id=7217
Are there nice flash hiders for Ak74's? I don't really like the current stock flash hider =\ Next is the front rail system (not the side one) for this particular gun... I would like top and side rails, planning to put a flash light + a reflux dot

As for internals, what would I really need to upgrade? Are the following enough?... barrel and spring for a fps limit game.

Really need your guy's help! Hoping to achieve the similar look in the pictures attached! (First picture is from Off_kilter, so thank you!).

Thank you for taking your time reading this!

[Off_kilter]

Heres some more pics for inspiration








Heres a link for the flash hider

http://www.srvv.org/en/catalog/1317/29860/

AS for a front mounted Red dot. Its not very popular in russia so I wouldn't know.

Maybe a ultimak style gas tube mount and one of the polymer lower handgrips?

http://www.ebairsoft.com/cyma-ak74-h...il-p-4603.html

http://www.ebairsoft.com/wii-ak-ris-...-set-p-29.html


NO one would mount a red dot on a polymer rail thats why i suggest the ultimak style.

[Oshiha]

Ooo that flash hider in the second picture, and the first one from the left. Any idea where to get that one?

The Wii AK RIS Handguard Set looks decent, but you know if its a good quality or not? I'm also looking forward to reduce the weight a bit on this thing, its so freaking heavy in the front end!

Any ideas how to change da stock? =\

[Off_kilter]

here you go...



http://www.red-alliance.net/forum/in...?topic=22009.0


As for the stock i would say you need to remove the pin in the stock. Reomive stock replace with SRVV buffer tube add pin and bingo!

[Oshiha]

How about the flash hider in the first picture?

Using the SRVV buffer tube, it would fit any m4 stock right? E.g. the magpul moe. You know if thats the only way to install a buffer tube onto a lct ak74 mn nv or are there cheaper alternative ways? Right now we're looking at $138 just for a buffer tube =\

Anyone know if this particular ris system would work on my gun?

http://shop.ehobbyasia.com/lct-quad-...ak-series.html

[Off_kilter]

Sadly the only readily available flash hider similar to the one your looking for is the srvv one ($55)

As for the buffer tube srvv has two one for milspec stocks and one for commercial stocks.

The reason these parts are this expensive is that theyre made for real Aks lol


That RIS will work but it will make your rifle more front heavy. LCT make a version of the polymer one (comes on some of their models) if you want a lighter weight and lower cost option.

[BennyBoy]

be patient and watch the classifies?

[Oshiha]

Originally Posted by BennyBoy

be patient and watch the classifies?

I'm looking for information on what fits on my gun, I'm still pretty new into modifications and have lot of questions.

Off_Kilter,

So the srvv flash hider would fit onto my lct ak74 and work just as fine right?

As for the buffer tube, http://www.srvv.org/en/catalog/29132...phrase_id=7226 this would be the one I would get for my gun since its commercial right?

Any link for da polymer version ?

[Off_kilter]

I'm not 100% sure but I believe your LCT has 14 mm CCW threading but then has an adapter to 24mm threading like seen in this pic



If so you are good because those are the two sizes AKs have used.
(You can use a die to check if you don't have one I do pm me and I can help you out)

As for the buffer tube milspec and commercial has to do with the Diameter of the buffer tube. One is larger then the other.

Milspec

http://store.magpul.com/product/MAG400/82

Commercial

http://store.magpul.com/product/MAG401/82

LCT RIS

http://www.wgcshop.com/wgc2008/main/...ct&catid=&cat=

Note on this one i believe airsoftgear.ca could import it for you.

[Oshiha]

I'll check if my LCT has 14 mm CCW threading and an adapter to 24mm threading.

So both milspec and commerical buffer tube fits on my ak. And when i'm choosing a stock, I would need to be very careful on which to pick, because there are commerical fit and milspec fit right? You know if this .... http://shop.ehobbyasia.com/accessori...ark-earth.html is commerical or mil spec? It doesn't say on ehobby.

I'm trying to buy most things on one website too, would this particular ris hand guard http://shop.ehobbyasia.com/a-p-s-ak7...ark-earth.html fit my gun?

Since there aren't much any other color for pts moe stock left, I'm trying to get a tan grip, tan handguard, tan pistol grip, and tan butt stock.

[Off_kilter]

You'll have to ask someone with knowledge of AR-15 accessories.

Also buy in Canada

http://www.airsoftstore.ca/index.php...95qfbbtabu8m02

You know what APS stands for right?

Go with the LCT that way you will have no doubts of it fitting...

I do have one of these styles of handguards its a G&G PM me if interested.



ewww stay with black!

[Oshiha]

Aight, I'll ask ehobby if they're milspec or commerical.

Its all sold out, im very impatient in waiting for them to restock! xD

Isn't APS a brand.. so Accuracy Pneumatics Shooting? So that handguard would not fit then?

Is the handguard (G&G) you have a little too short for ak74?

[Off_kilter]

You're so impatient you'll pay double?

APS stands for A piece of @#$%

Not sure on the G&G its from the bones of a dead gun. You can test fit beforehand.

[Oshiha]

Well how long do they usually restock them? Takes forever zzZz.

Oh LOl ok, not going to get them then! But it would fit right? just want to know so I can find similar thing but a lot better!

Mkay, I'll look it up first and see the dimensions.

[Off_kilter]

PM Stealth he runs that store.

Get the LCT one. All you have to do is email airsoftgear and they will bring it in or get it from WGC. Its garunteed to fit considering its from the same company.



http://www.airsoftcanada.com/showthread.php?t=135725


buy the milspec one