|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
May 29th, 2013, 11:57
|
#1 |
|
S&T PPSH: ROF fluctuation?
Hey guys.
Been noticing something odd with my PPSH as of late. On three different batteries, fully charged. I've found that my PPSH will suddenly 'lag' on its rate of fire during a longer burst. Switching to semi usually fixes this and is reliable. But being one of my (Well, formerly) best AEG's I'd certainly like to remedy this. Thinking it might be motor related, any thoughts? |
|
|
|
May 29th, 2013, 12:17
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
I have a feeling the microswitches in them are of particularly poor quality
I have one on my bench right now that has a burned out microswitch due to use of an 11.1v lipo Gun works fine if i plug the lipo right to the motor, gun acts like the battery is dead if I go through the microswitch. No wiring problems. Switch seems to have arced, either through normal use or more likely from boucne, and is super dirty, only you can't clean it BECAUSE ITS A MICROSWITCH -_- Hate microswitches. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
