HK3P G18C Stripped Screw on silencer tube

[CanadianKevin]

Hey All,

I got a HK3P G18c from a toronto vendor a few weeks ago and it is awesome, works perfectly but came with the longer tube attached to hold the silencer. I took the gun apart to attach the shorter silver tube so nothing would stick out past the barrel and i managed to strip one of the screws and can not take the longer tube off now.

Do any of you know where I can order this replacement part? there was no manual with the gun when I got it so im not sure exactly what part# it is. It is a black piece that holds the tube where the BB's shoot out of the barrel.

I tried emailing the company I got it from but got no reply so i figured I'd just ask you smart folk for possible places to buy a replacement part?

thanks again!

[ccyg8774]

what do you mean by the long tube? do you mean the inner barrel?

[ThunderCactus]

I assume he has a threaded outer barrel and wants the non-threaded snub barrel in there
I'm not entirely sure, but as with most glocks you shouldn't need any tools or remove any screws to take the inner barrel assembly out of the outer barrel, and you definitely don't need tools to get the barrel assembly out of the slide, so we've got no idea what you're talking about really....
You'll have to provide some pictures here

[DustMagnet]

Ah, another round of The Guessing Game...

I think he stripped one of the screws holding the hop-up chamber together (the "black piece").

[Mike.ng23]

Haha WOW! i just recently had the same problem! the last screw has so much locktide i stripped it to bits. my solution was to drill the screw to the point where the head of the screw came off very dangerous considering its that close to the hop-up but it worked for me! i do have to find a replacement screw though your other option is to buy a new hopup unit good luck!!~

[CanadianKevin]

Hey All! yep that picture is exactly what I'm talking about (DustMagnet), the screw closest to the inner barrel is completely stripped. I'd rather not screw it out as it works perfectly now. I just really do not want a silencer on it it's too big haha.

Any idea where I can get a whole new black part listed above for the HK3P G18C? I emailed a few online retailers in canada with no luck and i googled and have not found any!

Any help is greatly appreciated!

Thanks again!!

[GBBR]

use a heatgun. or a hair dryer. WE is putting a shittonne of threadlock on their guns now

[DustMagnet]

I believe WE and HK3P are the same/interchangeable.



http://airsoft.tiger111hk.com/Airsof...duct_info.html



http://airsoft.tiger111hk.com/p21243...duct_info.html

[DustMagnet]

Originally Posted by GBBR

use a heatgun. or a hair dryer. WE is putting a shittonne of threadlock on their guns now

I just swapped the importation barrels with the stock barrels on a WE 1911 Knighthawk and a WE G17 and both had no glue and/or difficulty getting the hop-up chamber screws out.

This was from a batch that was shipped out in late August or early September.

[CanadianKevin]

Would the 17 work on the 18c? And the problem is the screw is completely stripped, the other one i can get out no problem and i'd rather not drill it in case I damage it more. I checked the tiger111hk site and i was hoping there would be a fully assembled one I could just open up and put in the shorter inner barrel to. Would the only other option to this be to buy another whole gun? If there are any fixer places around that would ship a fully put together one i'd have no problem paying extra for that service.

[GBBR]

Originally Posted by DustMagnet

I just swapped the importation barrels with the stock barrels on a WE 1911 Knighthawk and a WE G17 and both had no glue and/or difficulty getting the hop-up chamber screws out.

This was from a batch that was shipped out in late August or early September.

I spent 5 hours at the store going thru about 150 pistols. this was the batch from mid-december, ALL have blue thread lock.

[ccyg8774]

Originally Posted by CanadianKevin

Would the 17 work on the 18c? And the problem is the screw is completely stripped, the other one i can get out no problem and i'd rather not drill it in case I damage it more. I checked the tiger111hk site and i was hoping there would be a fully assembled one I could just open up and put in the shorter inner barrel to. Would the only other option to this be to buy another whole gun? If there are any fixer places around that would ship a fully put together one i'd have no problem paying extra for that service.

You will need:
(Check the explosion diagram on your manual if you have a manual)
http://airsoft.tiger111hk.com/Airsof...duct_info.html
http://airsoft.tiger111hk.com/Airsof...duct_info.html
http://airsoft.tiger111hk.com/Airsof...duct_info.html
http://airsoft.tiger111hk.com/Airsof...duct_info.html
And a hop-up rubber. Get a better rubber than the stock one, an A+ studio one for TM/WE GBBP or a Tokyo Marui one.
Yes, these parts are the same among WE/HK3P G series, including G17, G18, G19 and more. Other parts may be not.
You can pay a local gun doc, or ask nicely to a friend with the experience, to assemble them together once you get them.

[CanadianKevin]

Thanks for the Tips, I will try and order all those parts and will try to assemble it when it gets here. if not ill post again and ask for help! haha.

I wish there was a site that sold them as one unit though

the tiger site goes in an endless loop when i try to check out lol.

[ccyg8774]

Originally Posted by CanadianKevin

Thanks for the Tips, I will try and order all those parts and will try to assemble it when it gets here. if not ill post again and ask for help! haha.

I wish there was a site that sold them as one unit though

the tiger site goes in an endless loop when i try to check out lol.

You will have to disassemble everything when you put the inner barrel in, so there is not much point to sell assembled unit.
Don't forget to order the hop-up rubber, and the correct hop-up rubber.
You might need to select the payment method at some point (scroll down and pick) during the check out.

[CanadianKevin]

ok thanks, i searched for hop up rubber for g or glock series and only found a ksc one, do they sell the one for my gun on this site or is it off another one? sorry for all the noob questions!