KJ Works Upgrade parts

gzibin · October 10th, 2005, 13:18

I've searched a few airsoft stores in canada for KJ works upgrade parts, and couldn't really find any. I think the problem is me in that I just don't know what I am looking for, (what parts will fit on what). I have 2 guns, the G23 and the M92F, both Metal Barrel/Slide ABS. I've notice on the M92F that the shot floats to the right heavily after about 20 feet. The only reason I noticed is because its really that bad. The G23 does the same, just not as bad as the M92F. I think I am up in the 260's-270's for the FPS on these guns (as per specarm's website) so I can't really increase a whole lot without going over 300 fps (which is what I understand the gun has to be at or less to play). Any suggestions? I should mention that I am running the propane adapter as well...

Kid · October 10th, 2005, 14:30

it could be the hop-up that needs adjusting, on the M9 I believe it's fixed, but on the G23 if you take off the slide there is a dial on the bottom, it's all 'picturized' in the manual

By the way, how do you like that G23?
I miss it already.. I even made instructions on how to use it one boring day... 8O
How to Shoot!

Edit - Don't want to bother 5000 members with another post, just want to give you the heads up that you're now at 6 posts, 1 positive feedback! Leave me some feedback here if you get a chance, Greg

Second Edit - thanks!

gzibin · October 10th, 2005, 14:39

Its a nice gun, I was rather impressed as to the condition it was in when you sent it to me. I was thinking more like a barrell that had treads or something, you know, that like changes the rotation on the BB like in paintball, you can change the direction of the spin to give it a straighter shot, while sacrificing 40 feet total achievable distance. Something like that, but if changing the springs, valves ect. will do the trick, it'd be nice to know where I can get the upgrade parts from.

captainafternoon · October 10th, 2005, 15:07

Well i have a G23 too and i dont think the G23 was meant for being upgraded seeing how there's little parts on the market. Im sure you can upgrade the valves but thats probly it. If you wanted to upgrade you guns you should have went with the KSC Glock 19.

gzibin · November 16th, 2005, 13:57

ok, but what place if any sells them? A review of the KJ elite M9 said there was "abundant" amounts of companies that make recoil springs, valves, all that juicey stuff, but I can't find one that does. But then again, google doesn't ALWAYS have the answer. This fourm doesn't seem to have any previous post's and neither does planet airsoft. ANY help would be appreciated. Thanks.

TheYellowDart · November 16th, 2005, 14:19

KJ guns are copies of other companies' guns. Just find out which brand guns are your guns copied from and look for the upgrade parts of those original guns. The parts SHOULD fit.

gzibin · November 16th, 2005, 16:06

but how would I find out who's they were copied from?

Grim Fandango · November 16th, 2005, 17:17

KJW M9 series - copy of Tokyo Marui M9
KJW Glock series - copy of Tokyo Marui glock series
KJW P14 - copy of Western Arms P14
KJW USP - I belive it's a copy of the Tanaka USP, can anyone confirm this?
KJW M700 - copy of Tanaka M700

gzibin · November 16th, 2005, 19:39

thanks a bunch grim fandango!!! Can you apply G26 upgrades to a G23? I haven't seen any G23 specific upgrades. I basiclly just want an upgraded recoil spring and valves for the G23 and the M9, but I found the stuff for the M9, just nothing for the G23.

weedsmoke · November 18th, 2005, 01:25

Anybody know much about the G32? I was looking getting one and wondering about the upgrades too? Also what magazines could be used? Are there extended ones? :-D
What about luminous sights? You guys know any good places to get them? That are in stock? And what would you guys get a HurricanE Laser Sight or a King Arms L250?

dead_aim · November 18th, 2005, 02:02

Quote:

Originally Posted by gzibin

thanks a bunch grim fandango!!! Can you apply G26 upgrades to a G23? I haven't seen any G23 specific upgrades. I basiclly just want an upgraded recoil spring and valves for the G23 and the M9, but I found the stuff for the M9, just nothing for the G23.

i also want to do this to my kjw m9....can you tell me which one your going/have got??

gzibin · November 19th, 2005, 01:24

well, I am still more or less still kind of looking at places that have the parts for the G23. Plus I need new mag's for the G23 and more mag's for the M9. I'd rather get it all at one place and save shipping fees. I've researched a few places, I know redwolfairsoft has springs for the M9 but not the G23. So I'll post when I get and what the results were. Also, anyone know if customs will sieze a mag?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 10th, 2005, 13:18	#1
gzibin Trader rating Join Date: Jul 2005 Location: Langley BC	KJ Works Upgrade parts I've searched a few airsoft stores in canada for KJ works upgrade parts, and couldn't really find any. I think the problem is me in that I just don't know what I am looking for, (what parts will fit on what). I have 2 guns, the G23 and the M92F, both Metal Barrel/Slide ABS. I've notice on the M92F that the shot floats to the right heavily after about 20 feet. The only reason I noticed is because its really that bad. The G23 does the same, just not as bad as the M92F. I think I am up in the 260's-270's for the FPS on these guns (as per specarm's website) so I can't really increase a whole lot without going over 300 fps (which is what I understand the gun has to be at or less to play). Any suggestions? I should mention that I am running the propane adapter as well... __________________ P.S. - This is what part of the alphabet would look like if Q and R were eliminated

October 10th, 2005, 14:39	#3
gzibin Trader rating Join Date: Jul 2005 Location: Langley BC	Its a nice gun, I was rather impressed as to the condition it was in when you sent it to me. I was thinking more like a barrell that had treads or something, you know, that like changes the rotation on the BB like in paintball, you can change the direction of the spin to give it a straighter shot, while sacrificing 40 feet total achievable distance. Something like that, but if changing the springs, valves ect. will do the trick, it'd be nice to know where I can get the upgrade parts from. __________________ P.S. - This is what part of the alphabet would look like if Q and R were eliminated

November 16th, 2005, 13:57	#5
gzibin Trader rating Join Date: Jul 2005 Location: Langley BC	ok, but what place if any sells them? A review of the KJ elite M9 said there was "abundant" amounts of companies that make recoil springs, valves, all that juicey stuff, but I can't find one that does. But then again, google doesn't ALWAYS have the answer. This fourm doesn't seem to have any previous post's and neither does planet airsoft. ANY help would be appreciated. Thanks. __________________ P.S. - This is what part of the alphabet would look like if Q and R were eliminated

October 10th, 2005, 14:30	#2
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	it could be the hop-up that needs adjusting, on the M9 I believe it's fixed, but on the G23 if you take off the slide there is a dial on the bottom, it's all 'picturized' in the manual By the way, how do you like that G23? I miss it already.. I even made instructions on how to use it one boring day... 8O How to Shoot! Edit - Don't want to bother 5000 members with another post, just want to give you the heads up that you're now at 6 posts, 1 positive feedback! Leave me some feedback here if you get a chance, Greg Second Edit - thanks!

October 10th, 2005, 15:07	#4
captainafternoon mrlexmark Trader rating Join Date: Aug 2004 Location: Oakville, Ontario	Well i have a G23 too and i dont think the G23 was meant for being upgraded seeing how there's little parts on the market. Im sure you can upgrade the valves but thats probly it. If you wanted to upgrade you guns you should have went with the KSC Glock 19.

November 16th, 2005, 14:19	#6
TheYellowDart Myoga Trader rating Join Date: Aug 2003 Location: Vancouver, BC	KJ guns are copies of other companies' guns. Just find out which brand guns are your guns copied from and look for the upgrade parts of those original guns. The parts SHOULD fit.

November 16th, 2005, 16:06	#7
gzibin Trader rating Join Date: Jul 2005 Location: Langley BC	but how would I find out who's they were copied from? __________________ P.S. - This is what part of the alphabet would look like if Q and R were eliminated

November 16th, 2005, 17:17	#8
Grim Fandango Trader rating Join Date: Oct 2002 Location: Toronto, Ontario	KJW M9 series - copy of Tokyo Marui M9 KJW Glock series - copy of Tokyo Marui glock series KJW P14 - copy of Western Arms P14 KJW USP - I belive it's a copy of the Tanaka USP, can anyone confirm this? KJW M700 - copy of Tanaka M700

November 16th, 2005, 19:39	#9
gzibin Trader rating Join Date: Jul 2005 Location: Langley BC	thanks a bunch grim fandango!!! Can you apply G26 upgrades to a G23? I haven't seen any G23 specific upgrades. I basiclly just want an upgraded recoil spring and valves for the G23 and the M9, but I found the stuff for the M9, just nothing for the G23. __________________ P.S. - This is what part of the alphabet would look like if Q and R were eliminated

November 18th, 2005, 01:25	#10
weedsmoke Trader rating Join Date: Oct 2005 Location: Newmarket	Anybody know much about the G32? I was looking getting one and wondering about the upgrades too? Also what magazines could be used? Are there extended ones? :-D What about luminous sights? You guys know any good places to get them? That are in stock? And what would you guys get a HurricanE Laser Sight or a King Arms L250?

November 19th, 2005, 01:24	#12
gzibin Trader rating Join Date: Jul 2005 Location: Langley BC	well, I am still more or less still kind of looking at places that have the parts for the G23. Plus I need new mag's for the G23 and more mag's for the M9. I'd rather get it all at one place and save shipping fees. I've researched a few places, I know redwolfairsoft has springs for the M9 but not the G23. So I'll post when I get and what the results were. Also, anyone know if customs will sieze a mag? __________________ P.S. - This is what part of the alphabet would look like if Q and R were eliminated

KJ Works Upgrade parts

Upgrades & Modifications