|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 9th, 2015, 19:55
|
#1 |
|
Upgrading my CM16 Raider
In what way would it be good to upgrade? Get new bearings and a 6.03 inner barrel?
Budget is looking to be around 100-150. Please give me suggestions! |
|
|
|
|
March 9th, 2015, 19:59
|
#2 |
|
Sell and buy a gun with a metal body ?
The polymer one is fine if you wanna go for an ultra lightweight setup.
__________________
 SuperCriollo |
|
|
|
|
March 9th, 2015, 22:58
|
#3 |
|
What to upgrade really depends on what you want to achieve. That said replacing only the bushings/bearings won't really yield much of a performance increase. A 6.03 inner barrel should increase your FPS slightly but won't really do much for your accuracy if you don't get a quality barrel. A quality tightbore like a Prometheus or PDI will run you pretty close to $100 or more after taxes/shipping.
After buying any gun the upgrades I would do would be: -Shim job -AOE correction (G&G V2 gearboxes are prone to cracking from my experiences) and sorbo -Metal hop up and bucking, although the G&G green bucking is pretty decent -Fix any and all air leaks These mods will be very well within your budget and will definitely increase the longevity of your gearbox. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
