Connection Break Error on IMAX charger

War-Lock · March 14th, 2015, 14:49

Hey ASC

http://www.hobbyking.com/hobbyking/s...arehouse_.html

I've got this charger, i use it to balance charge my lipos and now it just says connection break on every lipo i've got all 4 of them..

On the flip side Nicad nimh both charge fine,

Any ideas?

lurkingknight · March 14th, 2015, 16:26

something wrong with the balancer board maybe? try lipo charge mode not balance mode you don't have to connect the balancer, if that works then the balancer board is fucked maybe?

Sequential · March 14th, 2015, 17:44

Are you connecting all the leads...

If you read the manual, all the leads need to be connected in a loop.

So deans/tammia connectors plugged in and also the small white one.

Bigload · March 15th, 2015, 23:59

I had the same issue.
The Tamiya 'square and circle' connections are actually, backwards. I went to the local store and found the right small Tamiya plug and it worked fine.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 14th, 2015, 14:49	#1
War-Lock Trader rating Join Date: Dec 2003 Location: Woodbridge, Ontario	Connection Break Error on IMAX charger Hey ASC http://www.hobbyking.com/hobbyking/s...arehouse_.html I've got this charger, i use it to balance charge my lipos and now it just says connection break on every lipo i've got all 4 of them.. On the flip side Nicad nimh both charge fine, Any ideas? __________________ Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249

March 14th, 2015, 16:26	#2
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	something wrong with the balancer board maybe? try lipo charge mode not balance mode you don't have to connect the balancer, if that works then the balancer board is fucked maybe? __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

March 14th, 2015, 17:44	#3
Sequential Trader rating Join Date: Sep 2007 Location: HKG.YYZ.NRT	Are you connecting all the leads... If you read the manual, all the leads need to be connected in a loop. So deans/tammia connectors plugged in and also the small white one. __________________

March 15th, 2015, 23:59	#4
Bigload Trader rating Join Date: Jul 2012 Location: Stouffville	I had the same issue. The Tamiya 'square and circle' connections are actually, backwards. I went to the local store and found the right small Tamiya plug and it worked fine. __________________ M4 MK12 MOD0, SBR, KC02 G17 (B. A. Level 2 Cert.)

Connection Break Error on IMAX charger

Doctor's Corner