Chase Tactical Helmet

[BenG]

Does anyone have experiance with the Chase Tactical Bump helmets, Im looking for a real steel bump helmet option that does not have a molded NVG shroud as I would like to use a wilcox lanyard (for the record im not a fan or the team wendy LTP). My current emerson is falling apart, the shroud is becoming loose after 2 years of NVG mounting.

https://www.chasetactical.com/shop/c...non-ballistic/

[Rossco66]

Take a look at the FMA helmets. Sounds like they will fit the bill and you can get it Canada.

These guys were very helpful when I last dealt with them.

http://www.tactical-center.com/produ...s-combat-gear/

[BenG]

Originally Posted by Rossco66

Take a look at the FMA helmets. Sounds like they will fit the bill and you can get it Canada.

These guys were very helpful when I last dealt with them.

http://www.tactical-center.com/produ...s-combat-gear/

Thanks but not looking for repro, and in my opinion I think emerson helmets are better repros then FMA

[Kungpow]

Originally Posted by BenG

Thanks but not looking for repro, and in my opinion I think emerson helmets are better repros then FMA

https://www.protechelmet.com/products.asp?cat=14

I bought the PT A-Bravo.

Looks like they just came out with the new Advanced Tactical Helmet.

[EOD Steve]

The Chase helmets just look like FMA/Emerson/ACM carbon knockoffs. Where are they made?

An option is to get a repro helmet, replace the shroud with a Wilcox shroud and wait for Ops-core to release the carbon/bump lux liner and retrofit it in. Supposed to be released any day now. Highly recommended over any Occ-dial system.

Repro or knockoff liners just don't cut it for extended periods of time, especially if you plan on hanging NVGs off of it, which it sounds like you plan to.

[BenG]

Originally Posted by EOD Steve

The Chase helmets just look like FMA/Emerson/ACM carbon knockoffs. Where are they made?

An option is to get a repro helmet, replace the shroud with a Wilcox shroud and wait for Ops-core to release the carbon/bump lux liner and retrofit it in. Supposed to be released any day now. Highly recommended over any Occ-dial system.

Repro or knockoff liners just don't cut it for extended periods of time, especially if you plan on hanging NVGs off of it, which it sounds like you plan to.

That isnt a bad idea, im more concerned with the shroud falling off the helmet as the wilcox lanyard fixes to that , I totaly feel the liner thing, esspecially with the old russian gen 3 i used to run it got uncomfortable fast.

[St. Ides]

Originally Posted by BenG

im more concerned with the shroud falling off the helmet as the wilcox lanyard fixes to that

Loctite The real Ops-Core Carbon/Ballistic comes with the Loctite pre installed on the bolts holding everything down, the repo's do not! If its the shroud itself your worried about, buy a real shroud and throw it on your helmet.......just remember the Loctite!