TM VSR10 Gspec

[RagingBeaver]

problem, I know I should probably post in the doctor's corner, but it's divided into AEG/GBB, I'm just gonna post here, hopefully an admin can help out.

So here it is, is it a common problem for VSR10 Gspec to cock the gun, then the bb just roll out from the end of the barrel? is there some way i can fix it. because I just bought the gun and just tested it, and of 20 shots i took maybe 6-7 BBs rolled out... thats pretty high percentage, wouldn't want that in the field.
So is it just a common problem thats a simple fix? or did I buy from a seller that negated the fact his gun is a bit damaged?


thans for any help.

[Kid]

Is the hop-up turned totally off? If so, turn it on a bit, or alot, test and see.

[Valcrow]

even with the hop up totally off it shouldn't roll out unless you're double feeding somehow and the extra one is being pushed out. When the bb rolls out, is there still another one in there that fires, or do you just push out air?

I dont think this is a common problem though.. it's never happened to my vsr, and I've not heard of this problem before.. mine feeds perfectly down to the last bb. The only time it rolls out is if you dont cock all the way, and accidentally cock it again, or purposely cock it twice. Otherwize it's never happened to me, not even with the hop up off.

Have you tried taking it apart? might have missed the little hop up pusherdowner thingie.

[Mysteryfish]

That happened to mine...

But I'd done a few interesting things to it first, including:

-Drilling the cylinder head lock-lug out
-removing the cylinder head
-removing the piston
-removing the piston weights
-putting a spacer behind the spring
-cutting down the spring guide
-generally fucking up the whole gun...

Contact the seller.

I don't think that's a common issue, and especially not for a stock TM gun.

Out of the box, both of the two I owned/used were consistent, accurate, and generally satisfying to use.

[FOX_111]

Originally Posted by Mysteryfish

That happened to mine...

But I'd done a few interesting things to it first, including:

-Drilling the cylinder head lock-lug out
-removing the cylinder head
-removing the piston
-removing the piston weights
-putting a spacer behind the spring
-cutting down the spring guide
-generally fucking up the whole gun...

Contact the seller.

I don't think that's a common issue, and especially not for a stock TM gun.

Out of the box, both of the two I owned/used were consistent, accurate, and generally satisfying to use.

Haha why??
Some kind of very experimental upgrade strategie?

[nic_s]

Sounds like there's something the seller wasn't telling you.

[RagingBeaver]

umm no I don't cock twice, everytime the BB rolls out or rolls half way downt he barrel, i fire no second BB will comeout. and just now a few of the BBs even shot out and hit the end of the silencer @@ now i got a nice dent on the inside rim of the stock silencer... wtf..........
hop up is on, its still there. i cant figure it out.. is there some kind of o-rin that holds a BB in place until propelled?

o and thanks for all the reply.

[odp]

If you don't mind paying the postage both ways, I could take a look at it for you and compare it to my G-Spec.