AEG Hop Up

Rigio · January 27th, 2019, 08:21

Hey,

I just purchased a fully metal receiver to replace the plastic receiver for my M4. Now that I have the metal receiver, I've noticed that it does not have a bracket to secure the lower half of the two piece hop up.

Trying to avoid buying a new hop up as i just spent $80 on the metal receiver, has any tried to epoxy the two piece hop up together or heard of someone doing so? If so, how did it turn out? did you have to do any additional steps to make it work?

thanks in advance.

BobbyDangerous · January 27th, 2019, 11:04

Need more details. What M4 receiver Was the original

Rigio · January 27th, 2019, 19:09

Thank you for your quick reply, unfortunately I've purchased this M4 used a couple of years ago and don't know what brand it is. I do however have picture which will show the two receivers and the two pieces of the hop up system.

Sorry I couldn't attach the pictures directly to the post, let me know if the google drive link doesn't work.

https://drive.google.com/folderview?...fJQCGP8XPrQIG8

Rigio · January 27th, 2019, 19:30

It's an old Velocity Arms M4

RainyEyes · January 27th, 2019, 20:28

Looks like a standard m4 hop up but it's just 2 pieces. I imagine they moved away from that design because of alignment issues and fewer moving parts.

Just grab any old m4 unit that looks like the one you have and drop it in.

The next fun part starts when you drop it in and realize none of your old mags will feed with the new hop up unit.

Rigio · January 28th, 2019, 00:19

the issue is that the two piece hop up doesn't work in the new receiver as it does not have the bracket that holds the lower part of the hop up. I'm wondering if anyone has modified the two piece hop up to a one piece by gluing/epoxy the two together. If so were there any issues with the lower receiver not aligning properly with the mag.

I've tried googling solutions in hopes of finding someone that has successfully modded the hop up in this way but haven't had any luck. Was hoping someone here would have some insight.

RainyEyes · January 28th, 2019, 00:53

Quote:

Originally Posted by Rigio

the issue is that the two piece hop up doesn't work in the new receiver as it does not have the bracket that holds the lower part of the hop up. I'm wondering if anyone has modified the two piece hop up to a one piece by gluing/epoxy the two together. If so were there any issues with the lower receiver not aligning properly with the mag.

I've tried googling solutions in hopes of finding someone that has successfully modded the hop up in this way but haven't had any luck. Was hoping someone here would have some insight.

Get a new hop up unit. No point holding onto the old one that's now useless.

ThunderCactus · January 28th, 2019, 01:26

Get a new hop chamber.
Tokyo Marui used a 2 piece hop chamber so the M4 and M16 receivers could be split at the rear, like the real rifle.
This, however, was a completely fucktarded idea (especially considering they used a flexible plastic receiver) and only made things weaker and more complicated.

Every decent company that copied Tokyo Marui's design opted for a much more durable "slide apart" design with a much more reliable single piece hop chamber.

And given the variety of things that can go wrong adapting aftermarket metal receivers to plastic guns, let alone the cheapest of aftermarket receivers, it's generally considered a much safer idea to sell the plastic gun and buy a new gun that already has a metal receiver.

Rigio · January 28th, 2019, 01:33

Quote:

Originally Posted by ThunderCactus

Get a new hop chamber.
Tokyo Marui used a 2 piece hop chamber so the M4 and M16 receivers could be split at the rear, like the real rifle.
This, however, was a completely fucktarded idea (especially considering they used a flexible plastic receiver) and only made things weaker and more complicated.

Every decent company that copied Tokyo Marui's design opted for a much more durable "slide apart" design with a much more reliable single piece hop chamber.

And given the variety of things that can go wrong adapting aftermarket metal receivers to plastic guns, let alone the cheapest of aftermarket receivers, it's generally considered a much safer idea to sell the plastic gun and buy a new gun that already has a metal receiver.

Fair enough, however I've already bought the metal body so I'm already in the process of converting. My biggest concern with buying a single piece hop up is that then it wont properly seat into the mags. I was thinking of trying to epoxy the two piece hop up together so that it doesn't need the bracket on the lower receiver and will seat directly into the mag. Thoughts?

ThunderCactus · February 2nd, 2019, 00:47

The only functional difference between a two piece and single piece hop chamber is that the single piece hop chamber will not allow a plastic receiver to be split from the rear like a real steel receiver.
They are designed to use the same mags. $200-$300 metal receivers were expensive enough on their own back when they first came out. If we had to buy $160 worth of new mags as well, no one would have ever bought a metal receiver.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 27th, 2019, 08:21	#1
Rigio Trader rating Join Date: Jan 2019	AEG Hop Up Hey, I just purchased a fully metal receiver to replace the plastic receiver for my M4. Now that I have the metal receiver, I've noticed that it does not have a bracket to secure the lower half of the two piece hop up. Trying to avoid buying a new hop up as i just spent $80 on the metal receiver, has any tried to epoxy the two piece hop up together or heard of someone doing so? If so, how did it turn out? did you have to do any additional steps to make it work? thanks in advance.

January 27th, 2019, 11:04	#2
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	Need more details. What M4 receiver Was the original __________________ -Dangerous- BA Level 3 Certified

January 27th, 2019, 19:09	#3
Rigio Trader rating Join Date: Jan 2019	Thank you for your quick reply, unfortunately I've purchased this M4 used a couple of years ago and don't know what brand it is. I do however have picture which will show the two receivers and the two pieces of the hop up system. Sorry I couldn't attach the pictures directly to the post, let me know if the google drive link doesn't work. https://drive.google.com/folderview?...fJQCGP8XPrQIG8 Last edited by Rigio; January 27th, 2019 at 19:13..

January 27th, 2019, 19:30	#4
Rigio Trader rating Join Date: Jan 2019	It's an old Velocity Arms M4

January 27th, 2019, 20:28	#5
RainyEyes Trader rating Join Date: Sep 2013 Location: Scarbororororough	Looks like a standard m4 hop up but it's just 2 pieces. I imagine they moved away from that design because of alignment issues and fewer moving parts. Just grab any old m4 unit that looks like the one you have and drop it in. The next fun part starts when you drop it in and realize none of your old mags will feed with the new hop up unit.

January 28th, 2019, 00:19	#6
Rigio Trader rating Join Date: Jan 2019	the issue is that the two piece hop up doesn't work in the new receiver as it does not have the bracket that holds the lower part of the hop up. I'm wondering if anyone has modified the two piece hop up to a one piece by gluing/epoxy the two together. If so were there any issues with the lower receiver not aligning properly with the mag. I've tried googling solutions in hopes of finding someone that has successfully modded the hop up in this way but haven't had any luck. Was hoping someone here would have some insight. Last edited by Rigio; January 28th, 2019 at 00:22..

January 28th, 2019, 01:26	#8
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Get a new hop chamber. Tokyo Marui used a 2 piece hop chamber so the M4 and M16 receivers could be split at the rear, like the real rifle. This, however, was a completely fucktarded idea (especially considering they used a flexible plastic receiver) and only made things weaker and more complicated. Every decent company that copied Tokyo Marui's design opted for a much more durable "slide apart" design with a much more reliable single piece hop chamber. And given the variety of things that can go wrong adapting aftermarket metal receivers to plastic guns, let alone the cheapest of aftermarket receivers, it's generally considered a much safer idea to sell the plastic gun and buy a new gun that already has a metal receiver.

February 2nd, 2019, 00:47	#10
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	The only functional difference between a two piece and single piece hop chamber is that the single piece hop chamber will not allow a plastic receiver to be split from the rear like a real steel receiver. They are designed to use the same mags. $200-$300 metal receivers were expensive enough on their own back when they first came out. If we had to buy $160 worth of new mags as well, no one would have ever bought a metal receiver.

AEG Hop Up

Doctor's Corner