|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 8th, 2006, 02:43
|
#1 |
|
KSC USP compact blowback chamber
I had a mishap with a shity bottle of propane. since then when I use propane in my gun it will not fire. the slide cycles back about 1 inch and an extreme amount of gas blows out of the barrel and through the ejection port. for a while it was working fign on duster gas, however now it dose the same thing on duster as explained above. now I have completely taken the blowback chamber apart, as well as cleaned and relubed every part, so my question is there something I am missing like some sort of valve or flow restrictor anything that could have been damaged. or will I need to buy a new blowback chamber? now to kill 2 birds with one stone is there any shops that sell the complete blowback chamber? I have been unable to find any that sell the complete unit. there are some that have all the parts individually.
__________________
To live is to Die |
|
|
|
June 8th, 2006, 09:26
|
#2 |
|
Where have you been able to find the USP Compact blowback chamber? I've been looking for a replacement for a long time now and haven't seen any available at any of the HK online stores.
|
|
|
|
|
June 8th, 2006, 11:05
|
#3 |
|
|
http://www.wgcshop.com had some parts listed a while ago.
__________________
To live is to Die |
|
|
|
|
June 8th, 2006, 11:09
|
#4 |
|
I have a busted USPc that I've been trying to pawn off for a while now. Only things wrong are the broken trigger, frame cracked at the back, safety doesn't work. PM if you're interested, AGE VERIFIED USERS ONLY since it is still an entire gun. Also have a Fobus Kydex Roto-Holster to go with it. Sorry to turn this into a sales post but I thought it relevant to the question.
|
|
|
|
|
|
June 8th, 2006, 21:02
|
#5 | |
|
Quote:
I have all of the same problems. The trigger is broken, the hopup rubber is ripped to shreds, safety doesnt work... What the hell. I will never own a KSC USP Compact ever again. I also feel like selling it but we have our own section for ads so put it there. Anyone have any fixes for KSC USPc? I can't find rubbers or triggers ANYWHERE. :???:
__________________
|
|
|
|
|
|
June 8th, 2006, 21:43
|
#6 |
|
|
so in the end we all learned the same lesson. DONT BUY KSC USP COMPACT
__________________
To live is to Die |
|
|
|
|
June 21st, 2006, 22:23
|
#7 |
|
|
If nobody is willing to butcher their USP Compact to sell me their blowback chamber then perhaps somebody would be willing to buy my functional USP Compact? I've got a second one so I don't mind selling this one off.
Description here --> http://www.airsoftcanada.com/showthr...ht=USP+Compact Edit: my error in a rush I accidentally overlooked etiquette. PM me if interested. Also note I'm willing to sell for less without the mag. |
|
|
|
|
June 21st, 2006, 22:46
|
#8 | |
|
Quote:
__________________
"And that's how, with a few minor modifications, you can turn one ordinary gun, into five guns." - Moe Sizlack |
||
|
|
|
|
August 3rd, 2006, 01:42
|
#9 | |
|
NAAZ's #1 fan!
|
YOU FOOL ITS NOT BROKEEEEN
Take off your slide, take out your return spring and barrel, now pull the piston down all the way, if you cannot see a black rubber in the | | gap between the metal base and the plastic piston all you need to do is.... *will edit tommrowo SO TIRRRED OF THIS BLOODY GUN
__________________
Quote:
|
|
|
|
|
|
August 3rd, 2006, 02:33
|
#10 |
|
Like neir says. I have a USP that sat unused for over a year. It was a little dried out and the first time I went to use it, same thing happened to me. I reseated the piston seal, gave her a shot of silicone and PRESTO!!!
It's worked fine ever since.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
August 3rd, 2006, 03:52
|
#11 |
|
|
i tried that even replaced the seal with an o ring and it still happens.
__________________
To live is to Die |
|
|
|
|
August 11th, 2006, 12:39
|
#12 | ||
|
NAAZ's #1 fan!
|
ok, i kinda fergot about this....you replaced the seal? ummm how bout put the original one back in, and make sure that the smaller side of the o ring faces the back of the slide (a must)
If that doesnt help i'll take apart mine and take pictures to better illustrate what im saying. (or you could sell me your trigger, and throw the rest in the garbage) Quote:
Figure i might as well teach some of you kids how to reset the safty plate properly as well :| (my safty + de-cocker works perfect) still looking for a trigger tho...anyone know a reliable place to find one? (or a place that might sell a re-enforoced version??) (GOOD TIP KWO) MORE Silicone on the piston PYLE!!! it'll work.
__________________
Quote:
|
||
|
|
|
|
August 11th, 2006, 16:32
|
#13 |
|
|
That cup seal will come off again unless you put a tiny drop of krazy glue to keep it from coming off. Be very careful otherwise you'll need a replacement seal.
|
|
|
|
|
August 13th, 2006, 04:55
|
#14 |
|
|
is the cup seal not suposed to be seated tight against the back?
__________________
To live is to Die |
|
|
|
|
August 13th, 2006, 17:15
|
#15 | |
|
NAAZ's #1 fan!
|
Its supposed to beat seated in the first place visiable when holding the piston upsidedown. (NOT against the very back)
IF this doesnt help, add me to msn i'll take more pictures....it'll work eventually a-ex@hotmail.com
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
