KSC G17 upgrade

[Hectic]

I have put
high flow valves
tight bore barrel
metal slide
recoill spring and guide
mag relese
hammer spring
what else can increese durrability that i havent got yet
it at 317 now
Thanks for any help

[Hectic]

I was mainly wondering about
i think its the gas block but not sure its the part under the slide that has a plastic cylinder and a piston
what does that do and are there any metal parts to go here to make it more durrable

[ILLusion]

Diagrams like this make it easier when you want to refer to a part. Use the assigned numbers:






Other parts that are prone to breakage are these parts:

- #83
- #24
- #19

All parts are/were manufactured by an aftermarket company from stronger materials. Some are no longer in production (#83), but if you look hard enough, may still be able to find it.

#83 is made by GRS (but called a different part #)
#24 and 19 is made by Firefly.

[Hectic]

Thanks!
#'s 17 & 22-27 make a piston dose the presure in there propell the BB or move the slide?
are there parts for up grading these?
and are they worth it?
also does a metal part 10 exsist
here are some pics of my first GBB upgrade:hammer:
Thanks again you are a wealth of info sory for racking your brain again

[Hectic]

also i find that when i put in a full of gas but no bb's mag to test it
it sometime will fire a 2 round burst once or twice before it will fire normally does anyone know about this problem.
here are those pics i didn't post:banghead:
http://s197.photobucket.com/albums/a...ost%20upgrade/

[Tex]

yes you can get upgraded or reinforced parts for 23,24,25,27 I never saw the point of upgrading them the stock ones worked great for me though and part 10 also has an aftermarket part. also for even more durrability you can go with aftermarket parts 83, 74, and 19. but as pointed out already some parts are becoming harder to find. in the end I went to the glock 19 as it came with more metal stock like part 10.

[Hectic]

10 and 22 are plastic all the outher parts atre metal as far as i can tell even 78 that i hear breaks if you dry fire with the slide off.
Thanks again for the info
next Q I seen athis airsoft sergeon part 24 it claims to reduce gas consuption would that not reduce FPS? or does it maintain power through efficiencey.
pardon my spelling

[Hectic]

does the part 81 pin thing go over or under part 78
my problem is the gun will shoot 2 roud burst and then not re rack the hammer and sometimes the gas will vent
damn these GBB's are a pain in the arse if you buy a cheap slide:banghead:

[Tex]

under

[Hectic]

Thanks.

[Hectic]

ok i think ive got it
now what is the best way to cleane out all the old lube and crap i was thinking just some alcohol? but dont wanna ruin my gun so ill ask you experianced people first
Thank's!!

[CDN_Stalker]

Dishsoap and warm water will work fine without messing up your gun.

See?



Lol

[Hectic]

LOL!!!:lol:
Thanks!!:cheers:

[CDN_Stalker]

No prob. I had to wash both my G19 and my MK23 after Quick Pass III last month, was a reasonable amount of sand in both, not enough to make them not shoot, but enough to make it feel gritty.

[Hectic]

It worked great!
Thanks again!