Any feedback on the CA SCAR?

Seaforth72nd · August 24th, 2007, 12:46

I am just curious as to what the SCARR is like. Does CA still suffer from QA issues? Is the SCAR generally reliable? Any feedback from those that have them would be welcome.

Avenging Angel · August 24th, 2007, 17:37

CA still has huge QC issues. My fiance and I both purchased CA SCAR's and her tappet plate broke in less than 100 shots and my motor stripped itself in less than 1000. If you want to buy CA, make sure that you upgrade its internals from the start. That's just my opinion though.

hattrick · August 24th, 2007, 21:04

The tappet plate problem was mentioned in another thread. Its VERY common, dont be swayed by that detail. Replace it before using it, u'll have a quite reliable aeg. (then again, upgrades always do wonders :angel

CDN_Stalker · August 25th, 2007, 13:26

Replace the crappy yellow CA piston as well. I've had the same SCAR on my bench three times, was bone stock and on separate occasions, the motor chewed itself up because a tooth from the bevel gear snapped off and stuck in the spur gear, jamming it all (first game out); and the stock piston fragged the mechbox (second game out). Third time was just to upgrade it's performance and install more reliable TM parts just to get the stock CA parts to a minimum.

Overall it's not a bad gun, is quite accurate, it just needs some preventative part replacements for reliability. Considering the gun I worked on was Chef/Jackals and he has the worst luck with anyone's guns (aka. don't let him try any of yours out, guarateed to break! Lol, "kinda" kidding)................. he's since gone 4-5 games using his SCAR and it hasn't pooped out on him yet. So he called it "Chef Approved". If a gun lasts 6months in Chef's hands, it should last a lifetime in other's. Lmfao

Dynamo · August 25th, 2007, 20:50

get a VFC SCAR.

thephenom · August 26th, 2007, 04:57

Quote:

Originally Posted by Dynamo

get a VFC SCAR.

Price wise, I'd still stick with the CA. Even if you had to upgrade the CA, it'll probably still be much cheaper than VFC.

Ronan · August 26th, 2007, 05:06

CA SCAR H coming out soon fyi.

CA have awesome exterior and the shittiest internals ever.

thephenom · August 26th, 2007, 05:17

Quote:

Originally Posted by Ronan

CA SCAR H coming out soon fyi.

CA have awesome exterior and the shittiest internals ever.

CA is far from the shittiest comparing to Chinese clones. They are no TM, but IMO, they are closest to TM than any other manufacturer.

Every tier-1 has their problems, G&P too have glassy tappet plate with their M4s.

CDN_Stalker · August 26th, 2007, 10:33

Quote:

Originally Posted by thephenom

G&P too have glassy tappet plate with their M4s.

Very true, saw the tappet break end of first game day in a G&P SPR.

SHaKaL · August 26th, 2007, 12:34

Quote:

Originally Posted by Ronan

CA SCAR H coming out soon fyi.

CA have awesome exterior and the shittiest internals ever.

Dont talk with your head in your ass... I guess you have alot of experience with CA product...

Had mine for a 2 month now. Fired about 2000 bbs with it, original tappet plate (got a systema replacement in case it brake) put a prometheus ms100 in it and didnt have any problems at all.

Its the 3 Classic army i own; never ever had any problems with any of them...

CDN_Stalker · August 26th, 2007, 13:57

Quote:

Originally Posted by thephenom

Every tier-1 has their problems, G&P too have glassy tappet plate with their M4s.

Yup, I witnessed a G&P SPR's tappet plate snap end of the first game day it was used.

EDIT: Damn, I check the thread, the post I put in 2 hours ago didn't show up, so I repost it, to find I double posted.

Yuu · August 26th, 2007, 14:11

I have CA SCAR which tappet plate broken less than 5 mins before it got in the first game. Bought KingArms V2 tappet plate and upgraded the spring with Madbull M100 the SCAR is running really smooth. I don't know about the motor, nothing has occurred yet.

With CA stuff, you'll have to upgrade it anyways, this goes with VFC too. VFC Hk416 had few crappy internals and you'll eventually have to replace few parts.

SHaKaL · August 26th, 2007, 17:49

I must be lucky then...

Seems i'm the only one who didnt experience tappet plate failure on the scar.
I wont change it until it brake... mechbox removal on this rifle is a pain in the ass!

Jackals · August 26th, 2007, 19:56

Quote:

Originally Posted by Ronan

CA SCAR H coming out soon fyi.

CA have awesome exterior and the shittiest internals ever.

You must not have read my SCAR review in the review section.

Since Stalker has put the TM parts in my SCAR it has never ran better.

However my friend, the external was another problem. When I went to paint and put painters tape down to protect some of the area, the tape pulled off the base paintjob.

Even now, after about 6 games or so, the paint is starting to peel off a bit.

The SCAR has some major flaws in the internals, Once you get past that its fine.

attack-beaver · August 26th, 2007, 21:10

My CA G3-SG1 is bone stock and i put at least 2000 rounds thought it and it as not had any internal problems(my stock broke after its first game). i plan during my off season to drop an entire new mech box in it and keeping the old mech box as my back-up/CQC MB.

plus i cant wait for the CA SCAR H in black.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 24th, 2007, 12:46	#1
Seaforth72nd Trader rating Join Date: Jan 2003 Location: Vancouver	Any feedback on the CA SCAR? I am just curious as to what the SCARR is like. Does CA still suffer from QA issues? Is the SCAR generally reliable? Any feedback from those that have them would be welcome.

August 25th, 2007, 13:26	#4
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Replace the crappy yellow CA piston as well. I've had the same SCAR on my bench three times, was bone stock and on separate occasions, the motor chewed itself up because a tooth from the bevel gear snapped off and stuck in the spur gear, jamming it all (first game out); and the stock piston fragged the mechbox (second game out). Third time was just to upgrade it's performance and install more reliable TM parts just to get the stock CA parts to a minimum. Overall it's not a bad gun, is quite accurate, it just needs some preventative part replacements for reliability. Considering the gun I worked on was Chef/Jackals and he has the worst luck with anyone's guns (aka. don't let him try any of yours out, guarateed to break! Lol, "kinda" kidding)................. he's since gone 4-5 games using his SCAR and it hasn't pooped out on him yet. So he called it "Chef Approved". If a gun lasts 6months in Chef's hands, it should last a lifetime in other's. Lmfao __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

August 25th, 2007, 20:50	#5
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	get a VFC SCAR. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

August 24th, 2007, 17:37	#2
Avenging Angel Trader rating Join Date: Feb 2004 Location: Calgary, AB	CA still has huge QC issues. My fiance and I both purchased CA SCAR's and her tappet plate broke in less than 100 shots and my motor stripped itself in less than 1000. If you want to buy CA, make sure that you upgrade its internals from the start. That's just my opinion though.

August 26th, 2007, 17:49	#13
SHaKaL Trader rating Join Date: Jan 2005 Location: Trois-Rivi?res	I must be lucky then... Seems i'm the only one who didnt experience tappet plate failure on the scar. I wont change it until it brake... mechbox removal on this rifle is a pain in the ass! __________________ HellRanger 1969-2007 LRRP FOREVER 101e 506Pir Fox Company - SHTYK NOZH

August 26th, 2007, 21:10	#15
attack-beaver Trader rating Join Date: May 2005 Location: calgary	My CA G3-SG1 is bone stock and i put at least 2000 rounds thought it and it as not had any internal problems(my stock broke after its first game). i plan during my off season to drop an entire new mech box in it and keeping the old mech box as my back-up/CQC MB. plus i cant wait for the CA SCAR H in black.

Any feedback on the CA SCAR?

Airsoft Guns Discussion