|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 4th, 2008, 22:08
|
#1 |
|
KSC M9 inner barrel removal
Hey guys I ran into a little problem while trying to install a tightbore into my KSC M9
I removed the little pin that holds the inner barrel in place but have no idea as of how to actually remove the inner barrel+hop up assembly The manual is no help... there's just an arrow that shows the whole thing sliding out which I assumed would automatically happen due to the spring around the barrel Problem is after removing the pin it didn't pop out and I'm totally stumped Everything is flush with the outer barrel as if the pin was still in. So should I try to push the barrel out from the muzzle end?
__________________
Present TM AUG A2 [Standard/Commando barrel], KSC U.S. M9 HW, KSC USP Compact |
|
|
|
|
January 17th, 2008, 03:08
|
#2 |
|
annnyone?
__________________
Present TM AUG A2 [Standard/Commando barrel], KSC U.S. M9 HW, KSC USP Compact |
|
|
|
|
|
January 29th, 2008, 21:09
|
#3 |
|
Am I the only one with a KSC M9 around here...?
Do I have to entice people to buy before I can get help? Well here's how she performs in the snow: YouTube - KSC M9 Low Temperature Testing pt1/3 YouTube - KSC M9 Low Temperature Testing pt2/3 YouTube - KSC M9 Low Temperature Testing pt 3/3 As you can see, she's completely reliable even in -1C temperature 
__________________
Present TM AUG A2 [Standard/Commando barrel], KSC U.S. M9 HW, KSC USP Compact |
|
|
|
|
|
January 29th, 2008, 21:16
|
#4 |
|
KSC makes an M9?
Hunh.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
