WA SCW V12; loose barrel.

[duegunn]

Hi, everyone!

I purchased the Gilded V12 Remix model by WA two years back, but only recently got around to using it.

It seemed that the barrel has become slightly loose; if I push it gently i sinks further into the slide but when I draw the side back and then return it to its original position it protrudes further out again.

I've stripped it down to try and see if I can find the problem, but to no avail.

Can anyone help...

Many Thanks,

Nic

[safx]

Weird.

All my mint WA's have no movement in
that way, except for my workhorse SV—
it's original plastic chamber has some
wear to the lug grooves on top so it's
not engaging under the slide perfectly
anymore. Around 1mm of movement.
Make sure your not moving the slide.

Check your chamber and underside of
the slide for damage.

v12 has the cone hicap style barrel with
holes... is there a chamber return spring
system on the outside of the inner barrel?

Can I see a pic of your barrel being
pushed back, and what the chamber
looks like when you do this? Also like
to see the barrel out of the gun and
off the inner.