Airsoft Canada

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tokyo Marui FN P90 And The Mystery Of The Melting Battery

:

Upgrades & Modifications

Reply
 
Thread Tools
Old August 25th, 2008, 02:23   #1
Nabisco_Lobstrosity
 
Nabisco_Lobstrosity's Avatar
 
Join Date: Jun 2006
Location: Charlottetown, PEI
Tokyo Marui FN P90 And The Mystery Of The Melting Battery

I bought a used Tokyo Marui FN P90. I've gamed it twice, and used it around the house a handful of times. Up until today, the only battery I've ever used in it is this -

http://www.wgcshop.com/pcart/shopper...1700P_srch_p90
A 1700 mAh NiCd Sanyo battery. Up until today, nothing unusal about it.

I have a universal smart charger, that can charge either NiCd or NiMh batteries. I've had it for years.

So here's the fun part -

I wait until I get to the field to connect my battery. The moment I do connect it, before I even close the back of the P90, I can smell burning plastic. I get my face down closer to my P90, and I can actually hear something sizzling. Wasting no time, I disconnect the battery from the gearbox and use a screwdriver to pull out the battery. It's twisting around on the dirt, sizzling - plastic covering melting, the cell connectors are fizzling. Even after being disconnected, it's still smoldering for a good twenty minutes.

Okay, so my question is - what the hell? I've never had a battery do this to me. Now it looks like I set it on fire. The connectors can only connect one way, there's no place for metal to make contact with any conductive part of anything else inside my P90. A couple minutes later, I put in my backup battery, and my gun worked fine. It worked fine for the rest of the day.

All I did to mod the P90 to fit the battery was the same, standard stuff you'd see here, at Arnie's -
http://www.arniesairsoft.co.uk/?filn...90_battery.htm

Has anyone else run into the same sort of problem when modding their P90 for the J-shaped batteries?
__________________
Nabisco Lobstrosity
--------------------

Last edited by Nabisco_Lobstrosity; August 25th, 2008 at 02:28..
Nabisco_Lobstrosity is offline   Reply With Quote
Old August 25th, 2008, 03:02   #2
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Just a bad battery I'd say. Or it got too old maybe?
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old August 25th, 2008, 03:08   #3
Turd
Liberal Assassin
 
Turd's Avatar
 
Join Date: Jan 2008
Location: Alberta
how good is the wiring job on the battery?
__________________
CTW MK12 Mod 1
KWA HK45, USP 45
KSC G19
Turd is offline   Reply With Quote
Old August 25th, 2008, 03:12   #4
Airmax
 
Airmax's Avatar
 
Join Date: Aug 2006
Location: Langley, BC
Quote:
Originally Posted by Styrak View Post
Just a bad battery I'd say. Or it got too old maybe?
I use an J-shape battery as well and never had an issue to date (2 years of service) with my P90. But it sounds to me the battery had an short somewhere and burnt up.
When you mention putting the other battery in and having nothing happen but an working gun, just proves your other battery may have been bad and finally went. Good thing you got the battery out before you burnt up the back end of the P90, nothing worse playing in the field with an stinky gun!
cheers
__________________
That's what you said last time, Then look what happened!

(LMAG) http://www.lowermainlandairsoft.ca
Airmax is offline   Reply With Quote
Old August 25th, 2008, 03:27   #5
Dusti69
 
Dusti69's Avatar
 
Join Date: Mar 2008
Location: Huntingdon, PA Helsinki Vampires Forever!
Send a message via Yahoo to Dusti69
im using one of those sanyo brand large types in my ak. hope yours was just faulty and not brand related.
id hate for that shit to happen to mine. ive had that happen with crappy batteries before where they not only melt themselves but also the wires and connectors in the gun
__________________
Quote:
Originally Posted by MillerBRo View Post
dont let the elitist gun snobs who only clicked on your post to thread shit tell you other wise (they are OHHHH so helpful here- they wont offer you any help but will be self rightous pricks cause they are CLEARLY 'pros' who overpaid for their guns roflmao)
Dusti69 is offline   Reply With Quote
Old August 25th, 2008, 03:35   #6
DarkAngel
* Age Verifier status suspended *
 
DarkAngel's Avatar
 
Join Date: Jun 2006
Location: Scarborough
Send a message via MSN to DarkAngel
Faulty Battery, Most likely a Short. A 1700mah Sanyo JBatt melted (Brand new out of the box) or at least started to when i plugged it into my p90. I managed to get it out b4 it melted too much and saved my p90 from damage (however i had to replace the rear buttplate as it melted the latch closed)

Sanyos are one of the best batteries you can get, but sometimes they are faulty and you really cant get a warrenty or anything on them. I had to bite the bullet and take 70$ loss on 2 batts going up in smoke this way (P90 and Cranestock batt). They are expensive, but dispite the bad luck ive had, all my other guns MP5, p90, C8, C9 etc all use Sanyos. Theyve served me very well over several years time and dont die as fast as cheap batts like intellect and other batt companies.
__________________

Certified Sniper Clinic Instructor and Counter Sniper
Sentinel Arms Customs - Specializing In Unique, One of a kind guns
DarkAngel is offline   Reply With Quote
Old October 1st, 2008, 23:53   #7
green_ninja
 
green_ninja's Avatar
 
Join Date: Apr 2007
Location: Winnipeg
Send a message via MSN to green_ninja
it's probably faulty connector on the battery, is it a tamiya or deans ultra? I notice sometimes that the pins in the tamiyas bend if not lined up 'properly' with the other end- which could lead to the plastic part breaking causing a short b/w the pins.
__________________
LOL
green_ninja is offline   Reply With Quote
Old October 2nd, 2008, 00:14   #8
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
I have a Sanyo 9.6V custom nunchuck-style battery that uses those same cells. It's never caught fire on me, but the solder points are all pretty weak.
__________________
Crunchmeister is offline   Reply With Quote
Old October 3rd, 2008, 18:42   #9
Kos-Mos
 
Kos-Mos's Avatar
 
Join Date: Nov 2005
Location: LĂ©vis (QC)
hahahha

Do you know that Intellect batteries, let's say some 4200mAh, can run up to 120$ for a 7.2v pack.

Theses are NOT cheap batteries.

If you buy then off eBay for 10$, sure it is crap.

Get a good, decent pack and you will not have problems, whatever the brand is.

I am using Tenergy brand, but I get them right from the manufaturer instead of eBay. They never failed me, bought over 20 so far.

My friend bought the SAME battery off ebay. 2 packs. Both leaked when charging the first time.

You get what you pay for.
__________________
Quote:
Originally Posted by Drake View Post
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
Kos-Mos is offline   Reply With Quote
Old October 3rd, 2008, 20:20   #10
eV.Viper
 
Join Date: Jun 2006
Location: Montreal, Quebec
Got a nunchuck style battery and had to resolder wires (battery was already used)

But I think you just had a short with your battery.
__________________
Aka Raptor
TM M3 Shorty
KJW Beretta M9
eV.Viper is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada

All times are GMT -4. The time now is 03:06.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.