g36 upgrade

[prepaidpwnage]

I'm planning on upgrading my g36. I have about 200USD to work with. Granted i'd rather not run my self dry. I defiantly need a new hop up because the stock one broke. This is what i have so far. Tell me what you think. I currently have a stock jg g36k.

Option1:
MadBull ver.2 6.03mm 509mm tightbore -$35 USD
src folding/adjustable stock and rear wiring my gun -$65 USD
CA stock g36 hop up-$30USD
src barrel extension-$40USD

option 2:
-a pre owned upgraded gear box-reinforced spring guide, reinforced piston and piston head, aluminum cylinder, airseal nozzle, steel gearset, SRC ultra high torque motor 7MM steel bushings and M130 spring-$70 USD
-CA stock g36 hop up $30 USD
-I dont know what else

[ThunderCactus]

For starters, what brand is your G36? It really matters.

Second, do you want an asthetic upgrade or a performance upgrade?
And your going to want to throw in a hopup rubber in your list, it's 5$ and everyone always overlooks that little guy but it's one of the best upgrades you can make. And a GOOD rubber, not a stock CA one

[prepaidpwnage]

its a jg(jing gong).
the stock and silencer were to cover up the longer barrel and give me the ability to use large batteries.

i don't want to have to take off my silencer every time i need to change batteries.

[namloot]

I upgraded/customized my TM G36C into a G36KV:
http://img440.imageshack.us/img440/9...kv10241zk4.jpg
I got the G&P version of the SRC stock you mention a G&P "K" front set and a Star flat top rail.
You can put up to a 12v large battery in it. I use a 9.6v 4/5 sub c pack which allows the stock to be in the second shortest position.
I am using a Madbull 6.03 x 363mm barrel with it.
I'd get a TM hop up unit, they are the best.
To upgrade your muzzle velocity to where you want it, you are basically going to have to rebuild the internals/electrics of that AEG.

Good luck.