rear-wired, to front wired

[MP5HERO]

hey everyone, wondering if there is a way to convert a rear wired mechbox to a front wired one. looking to convert a full stock mp5 to a sliding stock one.. any tips or a walkthrough even of what to look for or how to rewire the gun, where do the wires go to, and from inside the body.

[panzergrenadier]

You can buy a V2 Front wire assembly... or with the Mp5 as I recall you just use wire extensions and use the rear wire to go to the front...

[F34N0R]

All mp5 are rearwired and use wire extensions to front or rear.

[MP5HERO]

where does the wiring go through the body. i took apart mine the other day and found very little space to run any wires to the front.

[swatt13]

al you do is feed the wires along the inside of the mechbox, take the wires out of the wire channels, and feed them out the front hole infront of the trigger switch assy. you may need to resolder one of the contacts just to get the wire to sit right. there is absolutly no need to buy a new front wire assy for something you can do in 12 secs with a soldering iron.

[CDN_Stalker]

Wires have to be run under the front part of the mechbox, under the hop up unit, and out the hole under the hop up. Can be tricky, especially when trying ot make the body halves close up fully (not a big deal if they don't, neither of mine really do either.)