Silicone Spray?

[ccssneo]

Would this silicone spray be reliable? I heard the wrong silicone spray and your magazines are messed.

http://www.canadiantire.ca/browse/pr...romSearch=true

[coach]

find the data sheet and see if there is any petroleum in it. petroleum will deteriorate your orings and seals. use only 100% silicone with your AEG/GBB's

in BC get yours here: http://www.mtmfg.ca/product/w70s-sil...icant-1779.cfm

or

http://www.airsoftparts.ca/store2/in...&cPath=117_127

[Crunchmeister]

That silicone spray is fine. It's not liek the lightweight silicone oil so you can't use it in your mags and such, but you can use it to lubricate moving parts on a GBB. It works quite well.

[ccssneo]

ok thx for the replys. I know this sounds like a noobie question but.. How do iuse the silicone oil in a magazine. Would i have to open it up? our would i just spray it down the bb feeding hole.

[L473ncy]

I believe it's just a little bit that's required. Too much and you gunk up the internals when the BB gets fired.

Check this video out:

YouTube - Gas Blowback Regular Maintenance

[coach]

Originally Posted by ccssneo

ok thx for the replys. I know this sounds like a noobie question but.. How do iuse the silicone oil in a magazine. Would i have to open it up? our would i just spray it down the bb feeding hole.

for GBB's a couple drops in the propane tank opening/adapter ever 7-8 fills. a drop or two in the bb track and wipe with a q-tip or rag to spread it around.

for aeg mags, a few drop into the feed opening. load with bb's and cycle through a few times.