Air duster can test

Sim123456 · February 10th, 2009, 09:10

I decided to conduct a test with a Duster air can to see if it was possible to pass threw one side. I receveid my .40g Madbull bbs, chrono it at 505fps@5.00j.

At gun point it did a perfect hole in it with a little punch on the outside. So it is possible

kalnaren · February 10th, 2009, 09:11

So let me get this straight.... you shot a can under pressure?

coach · February 10th, 2009, 09:15

I thought this was going to be a thread about shooting .4's on duster gas.

AngelusNex · February 10th, 2009, 09:46

so.........

Sim123456 · February 10th, 2009, 21:09

No an empty can sorry ^^

CDN_Stalker · February 10th, 2009, 22:31

Quote:

Originally Posted by Sim123456

No an empty can sorry ^^

Where's the fun in that?

Bissa · February 10th, 2009, 22:38

Quote:

Originally Posted by CDN_Stalker

Where's the fun in that?

When you find out that the can is not entirely empty.

Styrak · February 10th, 2009, 22:38

Quote:

Originally Posted by CDN_Stalker

Where's the fun in that?

Yeah, you need to set a rag on fire and drape it over a full can, and THEN shoot it at 500fps with 0.4 bb's.
Ghad.

Amos · February 10th, 2009, 22:47

Jesus christ...

What gun shoots 500 FPS on .4's??? ... Wouldn't that be roughly 900 FPS on .2??

Tankdude · February 10th, 2009, 22:51

Well, it depends, are you assuming the energy is constant or momentum is constant?

Bissa · February 11th, 2009, 02:27

Quote:

Originally Posted by Amos

Jesus christ...

What gun shoots 500 FPS on .4's??? ... Wouldn't that be roughly 900 FPS on .2??

707 FPS and 4.65 joules actually. I finaly found a reasonable use for my FPS calc I made today to pass time in math.

Sim123456 · February 11th, 2009, 08:14

Best chrono on the Xcortech with .20g is 656fps, 610 fps with .25g and 505 fps with .40.

Drake · February 11th, 2009, 08:50

Is there a point to this thread?

I'm not sure how this is useful, or even relevant. A pellet gun could also go through a duster can. And I once shot a brick with a 7.62x51mm and it totally shattered. Nobody is playing airsoft with any of those, either.

Styrak · February 11th, 2009, 12:04

Quote:

Originally Posted by Drake

Is there a point to this thread?

I'm not sure how this is useful, or even relevant. A pellet gun could also go through a duster can. And I once shot a brick with a 7.62x51mm and it totally shattered. Nobody is playing airsoft with any of those, either.

He just likes bragging about his FPS. He's had a few other threads like this

mcguyver · February 11th, 2009, 13:04

Quote:

Originally Posted by Amos

Jesus christ...

What gun shoots 500 FPS on .4's??? ... Wouldn't that be roughly 900 FPS on .2??

My KJW M700 did 475 fps with 0.36g at 5 degrees C in my garage on green gas. It went up when you used it outside in summertime. Totally stock gun, no upgrades at all.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 10th, 2009, 09:10	#1
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	Air duster can test I decided to conduct a test with a Duster air can to see if it was possible to pass threw one side. I receveid my .40g Madbull bbs, chrono it at 505fps@5.00j. At gun point it did a perfect hole in it with a little punch on the outside. So it is possible

February 10th, 2009, 22:47	#9
Amos Trader rating Join Date: Aug 2006 Location: Japan	Jesus christ... What gun shoots 500 FPS on .4's??? ... Wouldn't that be roughly 900 FPS on .2?? __________________ Custom Builds: FA3674U Krinkov G3SD6

February 11th, 2009, 08:50	#13
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	Is there a point to this thread? I'm not sure how this is useful, or even relevant. A pellet gun could also go through a duster can. And I once shot a brick with a 7.62x51mm and it totally shattered. Nobody is playing airsoft with any of those, either. __________________

February 10th, 2009, 09:15	#3
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	I thought this was going to be a thread about shooting .4's on duster gas.

February 10th, 2009, 09:46	#4
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	so.........

February 10th, 2009, 21:09	#5
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	No an empty can sorry ^^

February 10th, 2009, 22:51	#10
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	Well, it depends, are you assuming the energy is constant or momentum is constant?

February 11th, 2009, 08:14	#12
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	Best chrono on the Xcortech with .20g is 656fps, 610 fps with .25g and 505 fps with .40.

Air duster can test

Upgrades & Modifications