Well MB05 upgrade

[homegrown]

hey i just got the well-mb05 and i know there is a lot people say i have to mod on it what would you suggest????? im new to higher quality guns

[Rock 'N' Roll Outlaw]

You must be if you are running a Well

As far as I know that gun is compatible with most PDI products.

[NoGear]

they might mean mod as in spending over 500$ to make it sniper worthy but ur might need to MOD the but plate so it fits ur style. word of warning! sniper rifles are a bad FIRST gun to enter the game of airsoft. stock airsoft snipers are just as accurate as stock aeg's. Some players may not like you to use a sniper rifle because of trust issues.
saying that you might wana watch out when hitting or bumping this gun because it looks flimzy but im not sure because i do not own the gun :P if u own the AWM version. If you own the other one then try and find a tight bore to make it more accurater

welcome to ASC

[homegrown]

yeah i know it needs a lot of work lol but all i do is work so i got a bit of cash to put down on it...... iv done sniping b4 its just i wanted to change my setup..... if its flimsy then ill send it back and get the bar 10.... iv bn looking for a tight bore and considering a zero trigger unit but i wana knwo if i should just get better sears insted

[homegrown]

oh and thanks for the welcome im very new to all of this modding and all that so any advice yall wana shoot at me go ahead

[mrlapa]

I own MB05 and in my opinion, it dose not need much investment. I would recommend using Airsoft Elite Precision bbs, cause they are slightly bigger in diameter. Also, the stock barrel spacers are just shit, i used duck tape instead. DO NOT EVEN TUCH your bucking, i ripped my rubber and its impossible to find a replacement bucking.
i'll post some pics soon

[yuhaoyang]

I had one before... You need a zero trigger, which you can swap with the stock one when it breaks, which it will, a new hop-up chamber and rubber, new inner barrel, and inner barrel spacers, a new cylinder and cylinder head, a few springs to vary the FPS, a new spring guide as well.
Also, since I have no idea of what the inner barrel length is, I think it's a proprietary length(correct me if I'm wrong), get a thread adaptor, silencer, and an extra long inner barrel.

[homegrown]

cool thanks for the list any sites i should try cuz i went to airsofygi and it didnt seems like they dont have half of what i want

[yuhaoyang]

redwolfairsoft, ehobbyasia, and WGCshop

[homegrown]

now im gona go pdi for parts i think but i cant find any that say wellmb05 now can i buy any pdi and it will fit cuz it sounds kinda crazy for that to happen

[yuhaoyang]

It's a Maruzen clone, so L96 parts will fit. I'm not so sure about hop-up and inner barrel though, so if you buy them, buy both.

[Rock 'N' Roll Outlaw]

Originally Posted by homegrown

yeah i know it needs a lot of work lol but all i do is work so i got a bit of cash to put down on it...... iv done sniping b4 its just i wanted to change my setup..... if its flimsy then ill send it back and get the bar 10.... iv bn looking for a tight bore and considering a zero trigger unit but i wana knwo if i should just get better sears insted

Where have you done sniping before?

And just dont have high expectations of using a bolt action rifle in a game if its higher than 350 FPS (in most places) if you have never played before. Alot of those places will require you to have taken and passed the Level II Bolt Action Operator Course in order to prove you are a safe BA Operator. There will only be exceptions made in cases where the person is well known to the community and the majority of people you are playing with. Otherwise you can forget it if you are shooting hotter than 350 FPS.

And anything less than 400 FPS really has no real use, since you are at the same range as AEG's except they fire 60+ rounds by the time you can get your second shot off. If you are new to the sport then get an AEG if you wish to do more than backyard/basement plinking. If thats all you want to do then you have no real reason to upgrade, unless something breaks. Which most if not everything will break with a Well.

[homegrown]

i live in the backwoods of VA in the us..... so i play a lot of group fights in the boons nohtin like i guess official but there are alot of us..... i joined the canada group cuz yall seem to know ur stuff and are nicer then most people here lol..

[patcou]

Here's my personal list i would put in it:

First Factory PSS2 Zero Trigger For APS2
PDI Hop up Chamber Type 96
Hop up bucking
Prometheus 6.03 EG Barrel (500mm) or higher if you dont' want to take your silencer off
Lay lax 190-210SP spring
Lay lax Spring guide 9mm
PDI Tight Barrel Spacers

OK Stainless Cylinder
Aluminium Piston
Lay lax Damper cylinder head
Lay lax Power up Accuracy Cup

Duralmin outer barrel

oh and if your good with putty, sanding and painting get ready cause your stock will crack in your hands.

[Rock 'N' Roll Outlaw]

Originally Posted by homegrown

i live in the backwoods of VA in the us..... so i play a lot of group fights in the boons nohtin like i guess official but there are alot of us..... i joined the canada group cuz yall seem to know ur stuff and are nicer then most people here lol..

Ahh yeah that changes alot then, as our laws here in Canada are alot more stringent. But most of what I said still applies. I guess if you do intend on gaming it, it depends on what the kind of FPS limits the hosts in your area impose thus warranting the cost of making a BA gamable or not.

Originally Posted by patcou

Here's my personal list i would put in it:

First Factory PSS2 Zero Trigger For APS2
PDI Hop up Chamber Type 96
Hop up bucking
Prometheus 6.03 EG Barrel (500mm) or higher if you dont' want to take your silencer off
Lay lax 190-210SP spring
Lay lax Spring guide 9mm
PDI Tight Barrel Spacers

OK Stainless Cylinder
Aluminium Piston
Lay lax Damper cylinder head
Lay lax Power up Accuracy Cup

Duralmin outer barrel

oh and if your good with putty, sanding and painting get ready cause your stock will crack in your hands.

While these parts listed are indeed good (from what I hear) its always best to try and stick with one manufacturer, if possible. This avoids the hassle of fitment and cross-compatibility issues. When it comes to any Maruzen compatible L96 I find PDI is the best route to take as they make all needed upgrades.