|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
September 30th, 2009, 22:47 | #1 |
KWC Mini UZI Auto fire prob
Hi, first post here in this section, I have a used Uzi shoots at 450fps semi (still shoots in semi) but it does not fire well in Full Auto mode, It will shoot 3 or 4 rounds full auto then it stops and hisses for a secound or so, if i cock the gun it fires another 3 or 4 rounds then does the same thing.
the seals on the mag look fine. Could it be a weak spring on the hammer? or maybe a bent pin? I donno, i've examined every peace, all looks as it should. As i said it fires very well in semi... Anyhow any and all help would come in handy. Thanks Last edited by Fantasyvoyager; October 11th, 2009 at 18:31.. Reason: update symptoms |
|
October 11th, 2009, 18:33 | #2 |
I updated the symptoms
Article above describes all symptoms.
|
|
October 12th, 2009, 17:05 | #3 |
Solved !!
It turns out the Magazine is the problem, the gas release plunger is wonky , causeing it to vent gas. I'm going to buy more mags, and some parts.
|
|
|
Bookmarks |
|
|