Getting into Ak's~ Need some info

spartan117 · October 18th, 2009, 17:43

hey guys. I'm thinking of building an ak but i'm not sure what parts are compatible. I need some help :P

So i was looking to getting an AK 104 or ak105 and possible changing it to something like this:

YouTube - My Favorite Gun

I'm currently looking at the following parts:

What ak body would this stock tube fit on?

I'm not sure if these will fit a cyma/kalash steel ak104/105. And unfortunately these parts are only available at ebairsoft. I haven't been able to find these parts anywhere else. If anyone knows any other place please tell me~

Please....no ak purist comments. Just some assistance would be great. Thanks for reading.

Mitchell12 · October 18th, 2009, 17:52

You'll need a stock adapter then you can put like any armalite stock.

spartan117 · October 18th, 2009, 17:55

Quote:

Originally Posted by Mitchell12

You'll need a stock adapter then you can put like any armalite stock.

really? I heard the vltor stock tube fits directly onto a ak variant body. I don't know which one though. ak47, ak74 body?

cerealmaniac · October 18th, 2009, 17:55

i believe G&P makes that adaptor. you probably need a tactical ak metal body. somebody's selling one in classifieds.

spartan117 · October 18th, 2009, 18:00

Quote:

Originally Posted by cerealmaniac

i believe G&P makes that adaptor. you probably need a tactical ak metal body. somebody's selling one in classifieds.

Cool. Could you link me to it? I see tons of ak metal bodies i don't know which one is which.

Lakonian · October 18th, 2009, 19:14

Romeo_Sierra is selling a VFC AIMS PMC, which in my opinion is much better all round, and wont give you much of a headache running around for parts -hell, it'll probably cost less in the end too.

But, if you're dead-set on that project, I'd suggest forgoing the railed upper handguard, and get a railed gas-tube. Looks better, and you can still see your irons through your holo, or RDS.

spartan117 · October 18th, 2009, 19:51

Quote:

Originally Posted by Lakonian

Romeo_Sierra is selling a VFC AIMS PMC, which in my opinion is much better all round, and wont give you much of a headache running around for parts -hell, it'll probably cost less in the end too.

But, if you're dead-set on that project, I'd suggest forgoing the railed upper handguard, and get a railed gas-tube. Looks better, and you can still see your irons through your holo, or RDS.

Oh yea, i remember seeing that way back. But its $999~

. Plus i like the shorter length type aks. :P

spartan117 · October 27th, 2009, 02:39

Hm. What base gun should i start with? I was thinking of the G&G ak104 EVO.

Troy T. Moore · October 27th, 2009, 08:05

That is my advice.

I am building an AK104 and have the frontsight and flashhider on it's way from ebairsoft (which was a week slow on the shipping and not helpful when I e-mailed them) as that was the only place I could find such an item.

spartan117 · October 27th, 2009, 14:00

Quote:

Originally Posted by Troy T. Moore

That is my advice.

I am building an AK104 and have the frontsight and flashhider on it's way from ebairsoft (which was a week slow on the shipping and not helpful when I e-mailed them) as that was the only place I could find such an item.

I'm not gonna changing my entire project. Its supposed to be a tactical Ak Proj. I just need some advice on what to start with. I looked at those parts at ebaybanned. I'm not sure i want to order off them. They kinda suck.

Kokanee · October 27th, 2009, 14:11

Ebaybanned is absolutely fine - lately they are taking a bit to ship, but that's all.

Try looking up this http://www.redwolfairsoft.com/redwol...l?prodID=21285

I think that's what you are looking for.

Amos · October 27th, 2009, 14:36

Don't start with a G&G, their guns are not 100% TM compatible.

If I were you, I'd start with a TM since you're going to have to get the metal body anyways... That way you're also guaranteed 100% perfect fitment

cerealmaniac · October 27th, 2009, 14:36

Quote:

Originally Posted by Kokanee

Ebaybanned is absolutely fine - lately they are taking a bit to ship, but that's all.

Try looking up this http://www.redwolfairsoft.com/redwol...l?prodID=21285

I think that's what you are looking for.

too bad theres no way it will make it through the customs...

spartan117 · October 27th, 2009, 23:26

Quote:

Originally Posted by cerealmaniac

too bad theres no way it will make it through the customs...

yea..... Dam customs...Hm... but the TM's are quite expensive..

KNIVEZS · October 27th, 2009, 23:32

Quote:

Originally Posted by spartan117

yea..... Dam customs...Hm... but the TM's are quite expensive..

not that expensive, if you look at the classified they sell around $350-500

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 18th, 2009, 17:43	#1
spartan117 Trader rating Join Date: Sep 2007 Location: Vancouver B.C	Getting into Ak's~ Need some info hey guys. I'm thinking of building an ak but i'm not sure what parts are compatible. I need some help :P So i was looking to getting an AK 104 or ak105 and possible changing it to something like this: YouTube - My Favorite Gun I'm currently looking at the following parts: What ak body would this stock tube fit on? I'm not sure if these will fit a cyma/kalash steel ak104/105. And unfortunately these parts are only available at ebairsoft. I haven't been able to find these parts anywhere else. If anyone knows any other place please tell me~ Please....no ak purist comments. Just some assistance would be great. Thanks for reading. Last edited by spartan117; October 18th, 2009 at 17:47..

October 18th, 2009, 17:55	#4
cerealmaniac Trader rating Join Date: Jun 2008 Location: Alberta	i believe G&P makes that adaptor. you probably need a tactical ak metal body. somebody's selling one in classifieds. __________________ 飛虎隊 NEED ANY OLD/USED AK/MP5 PARTS!PM ME! Sales Thread Click Me AEG sales thread

October 27th, 2009, 08:05	#9
Troy T. Moore Trader rating Join Date: Aug 2008 Location: Saskatchewan	That is my advice. I am building an AK104 and have the frontsight and flashhider on it's way from ebairsoft (which was a week slow on the shipping and not helpful when I e-mailed them) as that was the only place I could find such an item. __________________ Call sign: Usurper

October 18th, 2009, 19:14	#6
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	Romeo_Sierra is selling a VFC AIMS PMC, which in my opinion is much better all round, and wont give you much of a headache running around for parts -hell, it'll probably cost less in the end too. But, if you're dead-set on that project, I'd suggest forgoing the railed upper handguard, and get a railed gas-tube. Looks better, and you can still see your irons through your holo, or RDS.

October 27th, 2009, 02:39	#8
spartan117 Trader rating Join Date: Sep 2007 Location: Vancouver B.C	Hm. What base gun should i start with? I was thinking of the G&G ak104 EVO.

October 27th, 2009, 14:11	#11
Kokanee Ministry of Peace Trader rating Join Date: Mar 2002	Ebaybanned is absolutely fine - lately they are taking a bit to ship, but that's all. Try looking up this http://www.redwolfairsoft.com/redwol...l?prodID=21285 I think that's what you are looking for.

October 27th, 2009, 14:36	#12
Amos Trader rating Join Date: Aug 2006 Location: Japan	Don't start with a G&G, their guns are not 100% TM compatible. If I were you, I'd start with a TM since you're going to have to get the metal body anyways... That way you're also guaranteed 100% perfect fitment __________________ Custom Builds: FA3674U Krinkov G3SD6

Getting into Ak's~ Need some info

Upgrades & Modifications