Marui Aug Foregrip

[blade_x23]

Can someone tell me how to assemble the marui aug foregrip onto the upper receiver? I had to get a replacement (as mine did not come with one because I bought it on here), and I'm not 100% sure how it's put together. I sorta understand, but don't know of the "proper" procedure to put it all together.

[Kos-Mos]

You will have 4 parts:

The grip body
The cross pin
The spring
The end cap

Place the grip on the receiver.
Place the spring hook in the grip so that it enters the pin at then end, and reach past the hole in the receiver.
Insert the cross pin in the hole. the grip and spring should hold in place.

Take some pliers or screw driver and pull on the other end of the spring.
Hook it to the loop inside the end cap.
Let the end cap go to it's place.

You are done.

[blade_x23]

Thanks Kos-Mos. Took a couple tries to get that damn spring onto the bottom cap, but i got it Now I just gotta retake it apart and spray the grip OD :| Silly TM not making an replacement OD foregrip version.

[Jimski]

you can take the metal bar that holds the grip out of the OD handle by letting the handle stay in warm water for a while (dissolves glue) and taking apart both sides, same thing with the black grip;
then you can use the OD plastic instead of the black.

[blade_x23]

Don't got an OD handle. My AUG came without a foregrip. But meh, nothin a bit of krylon camo OD or rustoleum camo OD to fix it up.